Initiale Version ohne ThreadX
This commit is contained in:
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,585 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32g0xx_ll_cortex.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of CORTEX LL module.
|
||||
@verbatim
|
||||
==============================================================================
|
||||
##### How to use this driver #####
|
||||
==============================================================================
|
||||
[..]
|
||||
The LL CORTEX driver contains a set of generic APIs that can be
|
||||
used by user:
|
||||
(+) SYSTICK configuration used by LL_mDelay and LL_Init1msTick
|
||||
functions
|
||||
(+) Low power mode configuration (SCB register of Cortex-MCU)
|
||||
(+) MPU API to configure and enable regions
|
||||
(+) API to access to MCU info (CPUID register)
|
||||
|
||||
@endverbatim
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2018 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file in
|
||||
* the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32G0xx_LL_CORTEX_H
|
||||
#define STM32G0xx_LL_CORTEX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32g0xx.h"
|
||||
|
||||
/** @addtogroup STM32G0xx_LL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL CORTEX
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup CORTEX_LL_Exported_Constants CORTEX Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_CLKSOURCE_HCLK SYSTICK Clock Source
|
||||
* @{
|
||||
*/
|
||||
#define LL_SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U /*!< AHB clock divided by 8 selected as SysTick clock source.*/
|
||||
#define LL_SYSTICK_CLKSOURCE_HCLK SysTick_CTRL_CLKSOURCE_Msk /*!< AHB clock selected as SysTick clock source. */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if __MPU_PRESENT
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_CTRL_HFNMI_PRIVDEF MPU Control
|
||||
* @{
|
||||
*/
|
||||
#define LL_MPU_CTRL_HFNMI_PRIVDEF_NONE 0x00000000U /*!< Disable NMI and privileged SW access */
|
||||
#define LL_MPU_CTRL_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk /*!< Enables the operation of MPU during hard fault, NMI, and FAULTMASK handlers */
|
||||
#define LL_MPU_CTRL_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk /*!< Enable privileged software access to default memory map */
|
||||
#define LL_MPU_CTRL_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) /*!< Enable NMI and privileged SW access */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_REGION MPU Region Number
|
||||
* @{
|
||||
*/
|
||||
#define LL_MPU_REGION_NUMBER0 0x00U /*!< REGION Number 0 */
|
||||
#define LL_MPU_REGION_NUMBER1 0x01U /*!< REGION Number 1 */
|
||||
#define LL_MPU_REGION_NUMBER2 0x02U /*!< REGION Number 2 */
|
||||
#define LL_MPU_REGION_NUMBER3 0x03U /*!< REGION Number 3 */
|
||||
#define LL_MPU_REGION_NUMBER4 0x04U /*!< REGION Number 4 */
|
||||
#define LL_MPU_REGION_NUMBER5 0x05U /*!< REGION Number 5 */
|
||||
#define LL_MPU_REGION_NUMBER6 0x06U /*!< REGION Number 6 */
|
||||
#define LL_MPU_REGION_NUMBER7 0x07U /*!< REGION Number 7 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_REGION_SIZE MPU Region Size
|
||||
* @{
|
||||
*/
|
||||
#define LL_MPU_REGION_SIZE_256B (0x07U << MPU_RASR_SIZE_Pos) /*!< 256B Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_512B (0x08U << MPU_RASR_SIZE_Pos) /*!< 512B Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_1KB (0x09U << MPU_RASR_SIZE_Pos) /*!< 1KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_2KB (0x0AU << MPU_RASR_SIZE_Pos) /*!< 2KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_4KB (0x0BU << MPU_RASR_SIZE_Pos) /*!< 4KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_8KB (0x0CU << MPU_RASR_SIZE_Pos) /*!< 8KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_16KB (0x0DU << MPU_RASR_SIZE_Pos) /*!< 16KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_32KB (0x0EU << MPU_RASR_SIZE_Pos) /*!< 32KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_64KB (0x0FU << MPU_RASR_SIZE_Pos) /*!< 64KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_128KB (0x10U << MPU_RASR_SIZE_Pos) /*!< 128KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_256KB (0x11U << MPU_RASR_SIZE_Pos) /*!< 256KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_512KB (0x12U << MPU_RASR_SIZE_Pos) /*!< 512KB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_1MB (0x13U << MPU_RASR_SIZE_Pos) /*!< 1MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_2MB (0x14U << MPU_RASR_SIZE_Pos) /*!< 2MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_4MB (0x15U << MPU_RASR_SIZE_Pos) /*!< 4MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_8MB (0x16U << MPU_RASR_SIZE_Pos) /*!< 8MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_16MB (0x17U << MPU_RASR_SIZE_Pos) /*!< 16MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_32MB (0x18U << MPU_RASR_SIZE_Pos) /*!< 32MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_64MB (0x19U << MPU_RASR_SIZE_Pos) /*!< 64MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_128MB (0x1AU << MPU_RASR_SIZE_Pos) /*!< 128MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_256MB (0x1BU << MPU_RASR_SIZE_Pos) /*!< 256MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_512MB (0x1CU << MPU_RASR_SIZE_Pos) /*!< 512MB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_1GB (0x1DU << MPU_RASR_SIZE_Pos) /*!< 1GB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_2GB (0x1EU << MPU_RASR_SIZE_Pos) /*!< 2GB Size of the MPU protection region */
|
||||
#define LL_MPU_REGION_SIZE_4GB (0x1FU << MPU_RASR_SIZE_Pos) /*!< 4GB Size of the MPU protection region */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_REGION_PRIVILEDGES MPU Region Privileges
|
||||
* @{
|
||||
*/
|
||||
#define LL_MPU_REGION_NO_ACCESS (0x00U << MPU_RASR_AP_Pos) /*!< No access*/
|
||||
#define LL_MPU_REGION_PRIV_RW (0x01U << MPU_RASR_AP_Pos) /*!< RW privileged (privileged access only)*/
|
||||
#define LL_MPU_REGION_PRIV_RW_URO (0x02U << MPU_RASR_AP_Pos) /*!< RW privileged - RO user (Write in a user program generates a fault) */
|
||||
#define LL_MPU_REGION_FULL_ACCESS (0x03U << MPU_RASR_AP_Pos) /*!< RW privileged & user (Full access) */
|
||||
#define LL_MPU_REGION_PRIV_RO (0x05U << MPU_RASR_AP_Pos) /*!< RO privileged (privileged read only)*/
|
||||
#define LL_MPU_REGION_PRIV_RO_URO (0x06U << MPU_RASR_AP_Pos) /*!< RO privileged & user (read only) */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_TEX MPU TEX Level
|
||||
* @{
|
||||
*/
|
||||
#define LL_MPU_TEX_LEVEL0 (0x00U << MPU_RASR_TEX_Pos) /*!< b000 for TEX bits */
|
||||
#define LL_MPU_TEX_LEVEL1 (0x01U << MPU_RASR_TEX_Pos) /*!< b001 for TEX bits */
|
||||
#define LL_MPU_TEX_LEVEL2 (0x02U << MPU_RASR_TEX_Pos) /*!< b010 for TEX bits */
|
||||
#define LL_MPU_TEX_LEVEL4 (0x04U << MPU_RASR_TEX_Pos) /*!< b100 for TEX bits */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_INSTRUCTION_ACCESS MPU Instruction Access
|
||||
* @{
|
||||
*/
|
||||
#define LL_MPU_INSTRUCTION_ACCESS_ENABLE 0x00U /*!< Instruction fetches enabled */
|
||||
#define LL_MPU_INSTRUCTION_ACCESS_DISABLE MPU_RASR_XN_Msk /*!< Instruction fetches disabled*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_SHAREABLE_ACCESS MPU Shareable Access
|
||||
* @{
|
||||
*/
|
||||
#define LL_MPU_ACCESS_SHAREABLE MPU_RASR_S_Msk /*!< Shareable memory attribute */
|
||||
#define LL_MPU_ACCESS_NOT_SHAREABLE 0x00U /*!< Not Shareable memory attribute */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_CACHEABLE_ACCESS MPU Cacheable Access
|
||||
* @{
|
||||
*/
|
||||
#define LL_MPU_ACCESS_CACHEABLE MPU_RASR_C_Msk /*!< Cacheable memory attribute */
|
||||
#define LL_MPU_ACCESS_NOT_CACHEABLE 0x00U /*!< Not Cacheable memory attribute */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EC_BUFFERABLE_ACCESS MPU Bufferable Access
|
||||
* @{
|
||||
*/
|
||||
#define LL_MPU_ACCESS_BUFFERABLE MPU_RASR_B_Msk /*!< Bufferable memory attribute */
|
||||
#define LL_MPU_ACCESS_NOT_BUFFERABLE 0x00U /*!< Not Bufferable memory attribute */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* __MPU_PRESENT */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup CORTEX_LL_Exported_Functions CORTEX Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EF_SYSTICK SYSTICK
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief This function checks if the Systick counter flag is active or not.
|
||||
* @note It can be used in timeout function on application side.
|
||||
* @rmtoll STK_CTRL COUNTFLAG LL_SYSTICK_IsActiveCounterFlag
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_SYSTICK_IsActiveCounterFlag(void)
|
||||
{
|
||||
return (((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == (SysTick_CTRL_COUNTFLAG_Msk)) ? 1UL : 0UL);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configures the SysTick clock source
|
||||
* @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_SetClkSource
|
||||
* @param Source This parameter can be one of the following values:
|
||||
* @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8
|
||||
* @arg @ref LL_SYSTICK_CLKSOURCE_HCLK
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_SYSTICK_SetClkSource(uint32_t Source)
|
||||
{
|
||||
if (Source == LL_SYSTICK_CLKSOURCE_HCLK)
|
||||
{
|
||||
SET_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
|
||||
}
|
||||
else
|
||||
{
|
||||
CLEAR_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get the SysTick clock source
|
||||
* @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_GetClkSource
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8
|
||||
* @arg @ref LL_SYSTICK_CLKSOURCE_HCLK
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_SYSTICK_GetClkSource(void)
|
||||
{
|
||||
return READ_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enable SysTick exception request
|
||||
* @rmtoll STK_CTRL TICKINT LL_SYSTICK_EnableIT
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_SYSTICK_EnableIT(void)
|
||||
{
|
||||
SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable SysTick exception request
|
||||
* @rmtoll STK_CTRL TICKINT LL_SYSTICK_DisableIT
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_SYSTICK_DisableIT(void)
|
||||
{
|
||||
CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Checks if the SYSTICK interrupt is enabled or disabled.
|
||||
* @rmtoll STK_CTRL TICKINT LL_SYSTICK_IsEnabledIT
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_SYSTICK_IsEnabledIT(void)
|
||||
{
|
||||
return ((READ_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk) == (SysTick_CTRL_TICKINT_Msk)) ? 1UL : 0UL);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EF_LOW_POWER_MODE LOW POWER MODE
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Processor uses sleep as its low power mode
|
||||
* @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableSleep
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_LPM_EnableSleep(void)
|
||||
{
|
||||
/* Clear SLEEPDEEP bit of Cortex System Control Register */
|
||||
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Processor uses deep sleep as its low power mode
|
||||
* @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableDeepSleep
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_LPM_EnableDeepSleep(void)
|
||||
{
|
||||
/* Set SLEEPDEEP bit of Cortex System Control Register */
|
||||
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configures sleep-on-exit when returning from Handler mode to Thread mode.
|
||||
* @note Setting this bit to 1 enables an interrupt-driven application to avoid returning to an
|
||||
* empty main application.
|
||||
* @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_EnableSleepOnExit
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_LPM_EnableSleepOnExit(void)
|
||||
{
|
||||
/* Set SLEEPONEXIT bit of Cortex System Control Register */
|
||||
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Do not sleep when returning to Thread mode.
|
||||
* @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_DisableSleepOnExit
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_LPM_DisableSleepOnExit(void)
|
||||
{
|
||||
/* Clear SLEEPONEXIT bit of Cortex System Control Register */
|
||||
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enabled events and all interrupts, including disabled interrupts, can wakeup the
|
||||
* processor.
|
||||
* @rmtoll SCB_SCR SEVEONPEND LL_LPM_EnableEventOnPend
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_LPM_EnableEventOnPend(void)
|
||||
{
|
||||
/* Set SEVEONPEND bit of Cortex System Control Register */
|
||||
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Only enabled interrupts or events can wakeup the processor, disabled interrupts are
|
||||
* excluded
|
||||
* @rmtoll SCB_SCR SEVEONPEND LL_LPM_DisableEventOnPend
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_LPM_DisableEventOnPend(void)
|
||||
{
|
||||
/* Clear SEVEONPEND bit of Cortex System Control Register */
|
||||
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CORTEX_LL_EF_MCU_INFO MCU INFO
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Get Implementer code
|
||||
* @rmtoll SCB_CPUID IMPLEMENTER LL_CPUID_GetImplementer
|
||||
* @retval Value should be equal to 0x41 for ARM
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_CPUID_GetImplementer(void)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_IMPLEMENTER_Msk) >> SCB_CPUID_IMPLEMENTER_Pos);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Variant number (The r value in the rnpn product revision identifier)
|
||||
* @rmtoll SCB_CPUID VARIANT LL_CPUID_GetVariant
|
||||
* @retval Value between 0 and 255 (0x0: revision 0)
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_CPUID_GetVariant(void)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_VARIANT_Msk) >> SCB_CPUID_VARIANT_Pos);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Architecture number
|
||||
* @rmtoll SCB_CPUID ARCHITECTURE LL_CPUID_GetArchitecture
|
||||
* @retval Value should be equal to 0xC for Cortex-M0+ devices
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_CPUID_GetArchitecture(void)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_ARCHITECTURE_Msk) >> SCB_CPUID_ARCHITECTURE_Pos);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Part number
|
||||
* @rmtoll SCB_CPUID PARTNO LL_CPUID_GetParNo
|
||||
* @retval Value should be equal to 0xC60 for Cortex-M0+
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_CPUID_GetParNo(void)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_PARTNO_Msk) >> SCB_CPUID_PARTNO_Pos);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Revision number (The p value in the rnpn product revision identifier, indicates patch release)
|
||||
* @rmtoll SCB_CPUID REVISION LL_CPUID_GetRevision
|
||||
* @retval Value between 0 and 255 (0x1: patch 1)
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_CPUID_GetRevision(void)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_REVISION_Msk) >> SCB_CPUID_REVISION_Pos);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if __MPU_PRESENT
|
||||
/** @defgroup CORTEX_LL_EF_MPU MPU
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Enable MPU with input options
|
||||
* @rmtoll MPU_CTRL ENABLE LL_MPU_Enable
|
||||
* @param Options This parameter can be one of the following values:
|
||||
* @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF_NONE
|
||||
* @arg @ref LL_MPU_CTRL_HARDFAULT_NMI
|
||||
* @arg @ref LL_MPU_CTRL_PRIVILEGED_DEFAULT
|
||||
* @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_MPU_Enable(uint32_t Options)
|
||||
{
|
||||
/* Enable the MPU*/
|
||||
WRITE_REG(MPU->CTRL, (MPU_CTRL_ENABLE_Msk | Options));
|
||||
/* Ensure MPU settings take effects */
|
||||
__DSB();
|
||||
/* Sequence instruction fetches using update settings */
|
||||
__ISB();
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable MPU
|
||||
* @rmtoll MPU_CTRL ENABLE LL_MPU_Disable
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_MPU_Disable(void)
|
||||
{
|
||||
/* Make sure outstanding transfers are done */
|
||||
__DMB();
|
||||
/* Disable MPU*/
|
||||
WRITE_REG(MPU->CTRL, 0U);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Check if MPU is enabled or not
|
||||
* @rmtoll MPU_CTRL ENABLE LL_MPU_IsEnabled
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_MPU_IsEnabled(void)
|
||||
{
|
||||
return ((READ_BIT(MPU->CTRL, MPU_CTRL_ENABLE_Msk) == (MPU_CTRL_ENABLE_Msk)) ? 1UL : 0UL);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enable a MPU region
|
||||
* @rmtoll MPU_RASR ENABLE LL_MPU_EnableRegion
|
||||
* @param Region This parameter can be one of the following values:
|
||||
* @arg @ref LL_MPU_REGION_NUMBER0
|
||||
* @arg @ref LL_MPU_REGION_NUMBER1
|
||||
* @arg @ref LL_MPU_REGION_NUMBER2
|
||||
* @arg @ref LL_MPU_REGION_NUMBER3
|
||||
* @arg @ref LL_MPU_REGION_NUMBER4
|
||||
* @arg @ref LL_MPU_REGION_NUMBER5
|
||||
* @arg @ref LL_MPU_REGION_NUMBER6
|
||||
* @arg @ref LL_MPU_REGION_NUMBER7
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_MPU_EnableRegion(uint32_t Region)
|
||||
{
|
||||
/* Set Region number */
|
||||
WRITE_REG(MPU->RNR, Region);
|
||||
/* Enable the MPU region */
|
||||
SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configure and enable a region
|
||||
* @rmtoll MPU_RNR REGION LL_MPU_ConfigRegion\n
|
||||
* MPU_RBAR REGION LL_MPU_ConfigRegion\n
|
||||
* MPU_RBAR ADDR LL_MPU_ConfigRegion\n
|
||||
* MPU_RASR XN LL_MPU_ConfigRegion\n
|
||||
* MPU_RASR AP LL_MPU_ConfigRegion\n
|
||||
* MPU_RASR S LL_MPU_ConfigRegion\n
|
||||
* MPU_RASR C LL_MPU_ConfigRegion\n
|
||||
* MPU_RASR B LL_MPU_ConfigRegion\n
|
||||
* MPU_RASR SIZE LL_MPU_ConfigRegion
|
||||
* @param Region This parameter can be one of the following values:
|
||||
* @arg @ref LL_MPU_REGION_NUMBER0
|
||||
* @arg @ref LL_MPU_REGION_NUMBER1
|
||||
* @arg @ref LL_MPU_REGION_NUMBER2
|
||||
* @arg @ref LL_MPU_REGION_NUMBER3
|
||||
* @arg @ref LL_MPU_REGION_NUMBER4
|
||||
* @arg @ref LL_MPU_REGION_NUMBER5
|
||||
* @arg @ref LL_MPU_REGION_NUMBER6
|
||||
* @arg @ref LL_MPU_REGION_NUMBER7
|
||||
* @param Address Value of region base address
|
||||
* @param SubRegionDisable Sub-region disable value between Min_Data = 0x00 and Max_Data = 0xFF
|
||||
* @param Attributes This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_MPU_REGION_SIZE_256B or @ref LL_MPU_REGION_SIZE_512B
|
||||
* or @ref LL_MPU_REGION_SIZE_1KB or @ref LL_MPU_REGION_SIZE_2KB or @ref LL_MPU_REGION_SIZE_4KB or @ref LL_MPU_REGION_SIZE_8KB or @ref LL_MPU_REGION_SIZE_16KB
|
||||
* or @ref LL_MPU_REGION_SIZE_32KB or @ref LL_MPU_REGION_SIZE_64KB or @ref LL_MPU_REGION_SIZE_128KB or @ref LL_MPU_REGION_SIZE_256KB or @ref LL_MPU_REGION_SIZE_512KB
|
||||
* or @ref LL_MPU_REGION_SIZE_1MB or @ref LL_MPU_REGION_SIZE_2MB or @ref LL_MPU_REGION_SIZE_4MB or @ref LL_MPU_REGION_SIZE_8MB or @ref LL_MPU_REGION_SIZE_16MB
|
||||
* or @ref LL_MPU_REGION_SIZE_32MB or @ref LL_MPU_REGION_SIZE_64MB or @ref LL_MPU_REGION_SIZE_128MB or @ref LL_MPU_REGION_SIZE_256MB or @ref LL_MPU_REGION_SIZE_512MB
|
||||
* or @ref LL_MPU_REGION_SIZE_1GB or @ref LL_MPU_REGION_SIZE_2GB or @ref LL_MPU_REGION_SIZE_4GB
|
||||
* @arg @ref LL_MPU_REGION_NO_ACCESS or @ref LL_MPU_REGION_PRIV_RW or @ref LL_MPU_REGION_PRIV_RW_URO or @ref LL_MPU_REGION_FULL_ACCESS
|
||||
* or @ref LL_MPU_REGION_PRIV_RO or @ref LL_MPU_REGION_PRIV_RO_URO
|
||||
* @arg @ref LL_MPU_TEX_LEVEL0 or @ref LL_MPU_TEX_LEVEL1 or @ref LL_MPU_TEX_LEVEL2 or @ref LL_MPU_TEX_LEVEL4
|
||||
* @arg @ref LL_MPU_INSTRUCTION_ACCESS_ENABLE or @ref LL_MPU_INSTRUCTION_ACCESS_DISABLE
|
||||
* @arg @ref LL_MPU_ACCESS_SHAREABLE or @ref LL_MPU_ACCESS_NOT_SHAREABLE
|
||||
* @arg @ref LL_MPU_ACCESS_CACHEABLE or @ref LL_MPU_ACCESS_NOT_CACHEABLE
|
||||
* @arg @ref LL_MPU_ACCESS_BUFFERABLE or @ref LL_MPU_ACCESS_NOT_BUFFERABLE
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_MPU_ConfigRegion(uint32_t Region, uint32_t SubRegionDisable, uint32_t Address, uint32_t Attributes)
|
||||
{
|
||||
/* Set Region number */
|
||||
WRITE_REG(MPU->RNR, Region);
|
||||
/* Set base address */
|
||||
WRITE_REG(MPU->RBAR, (Address & 0xFFFFFFE0U));
|
||||
/* Configure MPU */
|
||||
WRITE_REG(MPU->RASR, (MPU_RASR_ENABLE_Msk | Attributes | (SubRegionDisable << MPU_RASR_SRD_Pos)));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disable a region
|
||||
* @rmtoll MPU_RNR REGION LL_MPU_DisableRegion\n
|
||||
* MPU_RASR ENABLE LL_MPU_DisableRegion
|
||||
* @param Region This parameter can be one of the following values:
|
||||
* @arg @ref LL_MPU_REGION_NUMBER0
|
||||
* @arg @ref LL_MPU_REGION_NUMBER1
|
||||
* @arg @ref LL_MPU_REGION_NUMBER2
|
||||
* @arg @ref LL_MPU_REGION_NUMBER3
|
||||
* @arg @ref LL_MPU_REGION_NUMBER4
|
||||
* @arg @ref LL_MPU_REGION_NUMBER5
|
||||
* @arg @ref LL_MPU_REGION_NUMBER6
|
||||
* @arg @ref LL_MPU_REGION_NUMBER7
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_MPU_DisableRegion(uint32_t Region)
|
||||
{
|
||||
/* Set Region number */
|
||||
WRITE_REG(MPU->RNR, Region);
|
||||
/* Disable the MPU region */
|
||||
CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* __MPU_PRESENT */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32G0xx_LL_CORTEX_H */
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,958 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32g0xx_ll_gpio.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of GPIO LL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2018 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32G0xx_LL_GPIO_H
|
||||
#define STM32G0xx_LL_GPIO_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32g0xx.h"
|
||||
|
||||
/** @addtogroup STM32G0xx_LL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF)
|
||||
|
||||
/** @defgroup GPIO_LL GPIO
|
||||
* @{
|
||||
*/
|
||||
/** MISRA C:2012 deviation rule has been granted for following rules:
|
||||
* Rule-18.1_d - Medium: Array pointer `GPIOx' is accessed with index [..,..]
|
||||
* which may be out of array bounds [..,UNKNOWN] in following APIs:
|
||||
* LL_GPIO_GetAFPin_0_7
|
||||
* LL_GPIO_SetAFPin_0_7
|
||||
* LL_GPIO_SetAFPin_8_15
|
||||
* LL_GPIO_GetAFPin_8_15
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
#if defined(USE_FULL_LL_DRIVER)
|
||||
/** @defgroup GPIO_LL_Private_Macros GPIO Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /*USE_FULL_LL_DRIVER*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
#if defined(USE_FULL_LL_DRIVER)
|
||||
/** @defgroup GPIO_LL_ES_INIT GPIO Exported Init structures
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief LL GPIO Init Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
|
||||
This parameter can be any value of @ref GPIO_LL_EC_PIN */
|
||||
|
||||
uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_LL_EC_MODE.
|
||||
|
||||
GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinMode().*/
|
||||
|
||||
uint32_t Speed; /*!< Specifies the speed for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_LL_EC_SPEED.
|
||||
|
||||
GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinSpeed().*/
|
||||
|
||||
uint32_t OutputType; /*!< Specifies the operating output type for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_LL_EC_OUTPUT.
|
||||
|
||||
GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinOutputType().*/
|
||||
|
||||
uint32_t Pull; /*!< Specifies the operating Pull-up/Pull down for the selected pins.
|
||||
This parameter can be a value of @ref GPIO_LL_EC_PULL.
|
||||
|
||||
GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinPull().*/
|
||||
|
||||
uint32_t Alternate; /*!< Specifies the Peripheral to be connected to the selected pins.
|
||||
This parameter can be a value of @ref GPIO_LL_EC_AF.
|
||||
|
||||
GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetAFPin_0_7() and LL_GPIO_SetAFPin_8_15().*/
|
||||
} LL_GPIO_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* USE_FULL_LL_DRIVER */
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup GPIO_LL_Exported_Constants GPIO Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_LL_EC_PIN PIN
|
||||
* @{
|
||||
*/
|
||||
#define LL_GPIO_PIN_0 GPIO_BSRR_BS0 /*!< Select pin 0 */
|
||||
#define LL_GPIO_PIN_1 GPIO_BSRR_BS1 /*!< Select pin 1 */
|
||||
#define LL_GPIO_PIN_2 GPIO_BSRR_BS2 /*!< Select pin 2 */
|
||||
#define LL_GPIO_PIN_3 GPIO_BSRR_BS3 /*!< Select pin 3 */
|
||||
#define LL_GPIO_PIN_4 GPIO_BSRR_BS4 /*!< Select pin 4 */
|
||||
#define LL_GPIO_PIN_5 GPIO_BSRR_BS5 /*!< Select pin 5 */
|
||||
#define LL_GPIO_PIN_6 GPIO_BSRR_BS6 /*!< Select pin 6 */
|
||||
#define LL_GPIO_PIN_7 GPIO_BSRR_BS7 /*!< Select pin 7 */
|
||||
#define LL_GPIO_PIN_8 GPIO_BSRR_BS8 /*!< Select pin 8 */
|
||||
#define LL_GPIO_PIN_9 GPIO_BSRR_BS9 /*!< Select pin 9 */
|
||||
#define LL_GPIO_PIN_10 GPIO_BSRR_BS10 /*!< Select pin 10 */
|
||||
#define LL_GPIO_PIN_11 GPIO_BSRR_BS11 /*!< Select pin 11 */
|
||||
#define LL_GPIO_PIN_12 GPIO_BSRR_BS12 /*!< Select pin 12 */
|
||||
#define LL_GPIO_PIN_13 GPIO_BSRR_BS13 /*!< Select pin 13 */
|
||||
#define LL_GPIO_PIN_14 GPIO_BSRR_BS14 /*!< Select pin 14 */
|
||||
#define LL_GPIO_PIN_15 GPIO_BSRR_BS15 /*!< Select pin 15 */
|
||||
#define LL_GPIO_PIN_ALL (GPIO_BSRR_BS0 | GPIO_BSRR_BS1 | GPIO_BSRR_BS2 | \
|
||||
GPIO_BSRR_BS3 | GPIO_BSRR_BS4 | GPIO_BSRR_BS5 | \
|
||||
GPIO_BSRR_BS6 | GPIO_BSRR_BS7 | GPIO_BSRR_BS8 | \
|
||||
GPIO_BSRR_BS9 | GPIO_BSRR_BS10 | GPIO_BSRR_BS11 | \
|
||||
GPIO_BSRR_BS12 | GPIO_BSRR_BS13 | GPIO_BSRR_BS14 | \
|
||||
GPIO_BSRR_BS15) /*!< Select all pins */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_LL_EC_MODE Mode
|
||||
* @{
|
||||
*/
|
||||
#define LL_GPIO_MODE_INPUT (0x00000000U) /*!< Select input mode */
|
||||
#define LL_GPIO_MODE_OUTPUT GPIO_MODER_MODE0_0 /*!< Select output mode */
|
||||
#define LL_GPIO_MODE_ALTERNATE GPIO_MODER_MODE0_1 /*!< Select alternate function mode */
|
||||
#define LL_GPIO_MODE_ANALOG GPIO_MODER_MODE0 /*!< Select analog mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_LL_EC_OUTPUT Output Type
|
||||
* @{
|
||||
*/
|
||||
#define LL_GPIO_OUTPUT_PUSHPULL (0x00000000U) /*!< Select push-pull as output type */
|
||||
#define LL_GPIO_OUTPUT_OPENDRAIN GPIO_OTYPER_OT0 /*!< Select open-drain as output type */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_LL_EC_SPEED Output Speed
|
||||
* @{
|
||||
*/
|
||||
#define LL_GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< Select I/O low output speed */
|
||||
#define LL_GPIO_SPEED_FREQ_MEDIUM GPIO_OSPEEDR_OSPEED0_0 /*!< Select I/O medium output speed */
|
||||
#define LL_GPIO_SPEED_FREQ_HIGH GPIO_OSPEEDR_OSPEED0_1 /*!< Select I/O fast output speed */
|
||||
#define LL_GPIO_SPEED_FREQ_VERY_HIGH GPIO_OSPEEDR_OSPEED0 /*!< Select I/O high output speed */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#define LL_GPIO_SPEED_LOW LL_GPIO_SPEED_FREQ_LOW
|
||||
#define LL_GPIO_SPEED_MEDIUM LL_GPIO_SPEED_FREQ_MEDIUM
|
||||
#define LL_GPIO_SPEED_FAST LL_GPIO_SPEED_FREQ_HIGH
|
||||
#define LL_GPIO_SPEED_HIGH LL_GPIO_SPEED_FREQ_VERY_HIGH
|
||||
|
||||
|
||||
/** @defgroup GPIO_LL_EC_PULL Pull Up Pull Down
|
||||
* @{
|
||||
*/
|
||||
#define LL_GPIO_PULL_NO (0x00000000U) /*!< Select I/O no pull */
|
||||
#define LL_GPIO_PULL_UP GPIO_PUPDR_PUPD0_0 /*!< Select I/O pull up */
|
||||
#define LL_GPIO_PULL_DOWN GPIO_PUPDR_PUPD0_1 /*!< Select I/O pull down */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_LL_EC_AF Alternate Function
|
||||
* @{
|
||||
*/
|
||||
#define LL_GPIO_AF_0 (0x0000000U) /*!< Select alternate function 0 */
|
||||
#define LL_GPIO_AF_1 (0x0000001U) /*!< Select alternate function 1 */
|
||||
#define LL_GPIO_AF_2 (0x0000002U) /*!< Select alternate function 2 */
|
||||
#define LL_GPIO_AF_3 (0x0000003U) /*!< Select alternate function 3 */
|
||||
#define LL_GPIO_AF_4 (0x0000004U) /*!< Select alternate function 4 */
|
||||
#define LL_GPIO_AF_5 (0x0000005U) /*!< Select alternate function 5 */
|
||||
#define LL_GPIO_AF_6 (0x0000006U) /*!< Select alternate function 6 */
|
||||
#define LL_GPIO_AF_7 (0x0000007U) /*!< Select alternate function 7 */
|
||||
#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx)
|
||||
#define LL_GPIO_AF_8 (0x0000008U) /*!< Select alternate function 8 */
|
||||
#define LL_GPIO_AF_9 (0x0000009U) /*!< Select alternate function 9 */
|
||||
#define LL_GPIO_AF_10 (0x000000AU) /*!< Select alternate function 10 */
|
||||
#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup GPIO_LL_Exported_Macros GPIO Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_LL_EM_WRITE_READ Common Write and read registers Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Write a value in GPIO register
|
||||
* @param __INSTANCE__ GPIO Instance
|
||||
* @param __REG__ Register to be written
|
||||
* @param __VALUE__ Value to be written in the register
|
||||
* @retval None
|
||||
*/
|
||||
#define LL_GPIO_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
|
||||
|
||||
/**
|
||||
* @brief Read a value in GPIO register
|
||||
* @param __INSTANCE__ GPIO Instance
|
||||
* @param __REG__ Register to be read
|
||||
* @retval Register value
|
||||
*/
|
||||
#define LL_GPIO_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup GPIO_LL_Exported_Functions GPIO Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_LL_EF_Port_Configuration Port Configuration
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Configure gpio mode for a dedicated pin on dedicated port.
|
||||
* @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog.
|
||||
* @note Warning: only one pin can be passed as parameter.
|
||||
* @rmtoll MODER MODEy LL_GPIO_SetPinMode
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @param Mode This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_MODE_INPUT
|
||||
* @arg @ref LL_GPIO_MODE_OUTPUT
|
||||
* @arg @ref LL_GPIO_MODE_ALTERNATE
|
||||
* @arg @ref LL_GPIO_MODE_ANALOG
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Mode)
|
||||
{
|
||||
MODIFY_REG(GPIOx->MODER, ((Pin * Pin) * GPIO_MODER_MODE0), ((Pin * Pin) * Mode));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return gpio mode for a dedicated pin on dedicated port.
|
||||
* @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog.
|
||||
* @note Warning: only one pin can be passed as parameter.
|
||||
* @rmtoll MODER MODEy LL_GPIO_GetPinMode
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_GPIO_MODE_INPUT
|
||||
* @arg @ref LL_GPIO_MODE_OUTPUT
|
||||
* @arg @ref LL_GPIO_MODE_ALTERNATE
|
||||
* @arg @ref LL_GPIO_MODE_ANALOG
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(GPIOx->MODER, ((Pin * Pin) * GPIO_MODER_MODE0)) / (Pin * Pin));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configure gpio output type for several pins on dedicated port.
|
||||
* @note Output type as to be set when gpio pin is in output or
|
||||
* alternate modes. Possible type are Push-pull or Open-drain.
|
||||
* @rmtoll OTYPER OTy LL_GPIO_SetPinOutputType
|
||||
* @param GPIOx GPIO Port
|
||||
* @param PinMask This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @arg @ref LL_GPIO_PIN_ALL
|
||||
* @param OutputType This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_OUTPUT_PUSHPULL
|
||||
* @arg @ref LL_GPIO_OUTPUT_OPENDRAIN
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t PinMask, uint32_t OutputType)
|
||||
{
|
||||
MODIFY_REG(GPIOx->OTYPER, PinMask, (PinMask * OutputType));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return gpio output type for several pins on dedicated port.
|
||||
* @note Output type as to be set when gpio pin is in output or
|
||||
* alternate modes. Possible type are Push-pull or Open-drain.
|
||||
* @note Warning: only one pin can be passed as parameter.
|
||||
* @rmtoll OTYPER OTy LL_GPIO_GetPinOutputType
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @arg @ref LL_GPIO_PIN_ALL
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_GPIO_OUTPUT_PUSHPULL
|
||||
* @arg @ref LL_GPIO_OUTPUT_OPENDRAIN
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_GetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(GPIOx->OTYPER, Pin) / Pin);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configure gpio speed for a dedicated pin on dedicated port.
|
||||
* @note I/O speed can be Low, Medium, Fast or High speed.
|
||||
* @note Warning: only one pin can be passed as parameter.
|
||||
* @note Refer to datasheet for frequency specifications and the power
|
||||
* supply and load conditions for each speed.
|
||||
* @rmtoll OSPEEDR OSPEEDy LL_GPIO_SetPinSpeed
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @param Speed This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_SPEED_FREQ_LOW
|
||||
* @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM
|
||||
* @arg @ref LL_GPIO_SPEED_FREQ_HIGH
|
||||
* @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Speed)
|
||||
{
|
||||
MODIFY_REG(GPIOx->OSPEEDR, ((Pin * Pin) * GPIO_OSPEEDR_OSPEED0), ((Pin * Pin) * Speed));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return gpio speed for a dedicated pin on dedicated port.
|
||||
* @note I/O speed can be Low, Medium, Fast or High speed.
|
||||
* @note Warning: only one pin can be passed as parameter.
|
||||
* @note Refer to datasheet for frequency specifications and the power
|
||||
* supply and load conditions for each speed.
|
||||
* @rmtoll OSPEEDR OSPEEDy LL_GPIO_GetPinSpeed
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_GPIO_SPEED_FREQ_LOW
|
||||
* @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM
|
||||
* @arg @ref LL_GPIO_SPEED_FREQ_HIGH
|
||||
* @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_GetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(GPIOx->OSPEEDR, ((Pin * Pin) * GPIO_OSPEEDR_OSPEED0)) / (Pin * Pin));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configure gpio pull-up or pull-down for a dedicated pin on a dedicated port.
|
||||
* @note Warning: only one pin can be passed as parameter.
|
||||
* @rmtoll PUPDR PUPDy LL_GPIO_SetPinPull
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @param Pull This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PULL_NO
|
||||
* @arg @ref LL_GPIO_PULL_UP
|
||||
* @arg @ref LL_GPIO_PULL_DOWN
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Pull)
|
||||
{
|
||||
MODIFY_REG(GPIOx->PUPDR, ((Pin * Pin) * GPIO_PUPDR_PUPD0), ((Pin * Pin) * Pull));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return gpio pull-up or pull-down for a dedicated pin on a dedicated port
|
||||
* @note Warning: only one pin can be passed as parameter.
|
||||
* @rmtoll PUPDR PUPDy LL_GPIO_GetPinPull
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PULL_NO
|
||||
* @arg @ref LL_GPIO_PULL_UP
|
||||
* @arg @ref LL_GPIO_PULL_DOWN
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_GetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(GPIOx->PUPDR, ((Pin * Pin) * GPIO_PUPDR_PUPD0)) / (Pin * Pin));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configure gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port.
|
||||
* @note Possible values are from AF0 to AF7 depending on target.
|
||||
* @note Warning: only one pin can be passed as parameter.
|
||||
* @rmtoll AFRL AFSELy LL_GPIO_SetAFPin_0_7
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @param Alternate This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_AF_0
|
||||
* @arg @ref LL_GPIO_AF_1
|
||||
* @arg @ref LL_GPIO_AF_2
|
||||
* @arg @ref LL_GPIO_AF_3
|
||||
* @arg @ref LL_GPIO_AF_4
|
||||
* @arg @ref LL_GPIO_AF_5
|
||||
* @arg @ref LL_GPIO_AF_6
|
||||
* @arg @ref LL_GPIO_AF_7
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_SetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate)
|
||||
{
|
||||
MODIFY_REG(GPIOx->AFR[0], ((((Pin * Pin) * Pin) * Pin) * GPIO_AFRL_AFSEL0),
|
||||
((((Pin * Pin) * Pin) * Pin) * Alternate));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port.
|
||||
* @rmtoll AFRL AFSELy LL_GPIO_GetAFPin_0_7
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_GPIO_AF_0
|
||||
* @arg @ref LL_GPIO_AF_1
|
||||
* @arg @ref LL_GPIO_AF_2
|
||||
* @arg @ref LL_GPIO_AF_3
|
||||
* @arg @ref LL_GPIO_AF_4
|
||||
* @arg @ref LL_GPIO_AF_5
|
||||
* @arg @ref LL_GPIO_AF_6
|
||||
* @arg @ref LL_GPIO_AF_7
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(GPIOx->AFR[0],
|
||||
((((Pin * Pin) * Pin) * Pin) * GPIO_AFRL_AFSEL0)) / (((Pin * Pin) * Pin) * Pin));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Configure gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port.
|
||||
* @note Possible values are from AF0 to AF7 depending on target.
|
||||
* @note Warning: only one pin can be passed as parameter.
|
||||
* @rmtoll AFRH AFSELy LL_GPIO_SetAFPin_8_15
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @param Alternate This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_AF_0
|
||||
* @arg @ref LL_GPIO_AF_1
|
||||
* @arg @ref LL_GPIO_AF_2
|
||||
* @arg @ref LL_GPIO_AF_3
|
||||
* @arg @ref LL_GPIO_AF_4
|
||||
* @arg @ref LL_GPIO_AF_5
|
||||
* @arg @ref LL_GPIO_AF_6
|
||||
* @arg @ref LL_GPIO_AF_7
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_SetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate)
|
||||
{
|
||||
MODIFY_REG(GPIOx->AFR[1], (((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * GPIO_AFRH_AFSEL8),
|
||||
(((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * Alternate));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port.
|
||||
* @note Possible values are from AF0 to AF7 depending on target.
|
||||
* @rmtoll AFRH AFSELy LL_GPIO_GetAFPin_8_15
|
||||
* @param GPIOx GPIO Port
|
||||
* @param Pin This parameter can be one of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @retval Returned value can be one of the following values:
|
||||
* @arg @ref LL_GPIO_AF_0
|
||||
* @arg @ref LL_GPIO_AF_1
|
||||
* @arg @ref LL_GPIO_AF_2
|
||||
* @arg @ref LL_GPIO_AF_3
|
||||
* @arg @ref LL_GPIO_AF_4
|
||||
* @arg @ref LL_GPIO_AF_5
|
||||
* @arg @ref LL_GPIO_AF_6
|
||||
* @arg @ref LL_GPIO_AF_7
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin)
|
||||
{
|
||||
return (uint32_t)(READ_BIT(GPIOx->AFR[1],
|
||||
(((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * GPIO_AFRH_AFSEL8)) / ((((Pin >> 8U) *
|
||||
(Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)));
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Lock configuration of several pins for a dedicated port.
|
||||
* @note When the lock sequence has been applied on a port bit, the
|
||||
* value of this port bit can no longer be modified until the
|
||||
* next reset.
|
||||
* @note Each lock bit freezes a specific configuration register
|
||||
* (control and alternate function registers).
|
||||
* @rmtoll LCKR LCKK LL_GPIO_LockPin
|
||||
* @param GPIOx GPIO Port
|
||||
* @param PinMask This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @arg @ref LL_GPIO_PIN_ALL
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
|
||||
{
|
||||
__IO uint32_t temp;
|
||||
WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask);
|
||||
WRITE_REG(GPIOx->LCKR, PinMask);
|
||||
WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask);
|
||||
/* Read LCKK register. This read is mandatory to complete key lock sequence */
|
||||
temp = READ_REG(GPIOx->LCKR);
|
||||
(void) temp;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return 1 if all pins passed as parameter, of a dedicated port, are locked. else Return 0.
|
||||
* @rmtoll LCKR LCKy LL_GPIO_IsPinLocked
|
||||
* @param GPIOx GPIO Port
|
||||
* @param PinMask This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @arg @ref LL_GPIO_PIN_ALL
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_IsPinLocked(GPIO_TypeDef *GPIOx, uint32_t PinMask)
|
||||
{
|
||||
return ((READ_BIT(GPIOx->LCKR, PinMask) == (PinMask)) ? 1UL : 0UL);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return 1 if one of the pin of a dedicated port is locked. else return 0.
|
||||
* @rmtoll LCKR LCKK LL_GPIO_IsAnyPinLocked
|
||||
* @param GPIOx GPIO Port
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_IsAnyPinLocked(GPIO_TypeDef *GPIOx)
|
||||
{
|
||||
return ((READ_BIT(GPIOx->LCKR, GPIO_LCKR_LCKK) == (GPIO_LCKR_LCKK)) ? 1UL : 0UL);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup GPIO_LL_EF_Data_Access Data Access
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Return full input data register value for a dedicated port.
|
||||
* @rmtoll IDR IDy LL_GPIO_ReadInputPort
|
||||
* @param GPIOx GPIO Port
|
||||
* @retval Input data register value of port
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_ReadInputPort(GPIO_TypeDef *GPIOx)
|
||||
{
|
||||
return (uint32_t)(READ_REG(GPIOx->IDR));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return if input data level for several pins of dedicated port is high or low.
|
||||
* @rmtoll IDR IDy LL_GPIO_IsInputPinSet
|
||||
* @param GPIOx GPIO Port
|
||||
* @param PinMask This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @arg @ref LL_GPIO_PIN_ALL
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_IsInputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask)
|
||||
{
|
||||
return ((READ_BIT(GPIOx->IDR, PinMask) == (PinMask)) ? 1UL : 0UL);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Write output data register for the port.
|
||||
* @rmtoll ODR ODy LL_GPIO_WriteOutputPort
|
||||
* @param GPIOx GPIO Port
|
||||
* @param PortValue Level value for each pin of the port
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_WriteOutputPort(GPIO_TypeDef *GPIOx, uint32_t PortValue)
|
||||
{
|
||||
WRITE_REG(GPIOx->ODR, PortValue);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return full output data register value for a dedicated port.
|
||||
* @rmtoll ODR ODy LL_GPIO_ReadOutputPort
|
||||
* @param GPIOx GPIO Port
|
||||
* @retval Output data register value of port
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_ReadOutputPort(GPIO_TypeDef *GPIOx)
|
||||
{
|
||||
return (uint32_t)(READ_REG(GPIOx->ODR));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return if input data level for several pins of dedicated port is high or low.
|
||||
* @rmtoll ODR ODy LL_GPIO_IsOutputPinSet
|
||||
* @param GPIOx GPIO Port
|
||||
* @param PinMask This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @arg @ref LL_GPIO_PIN_ALL
|
||||
* @retval State of bit (1 or 0).
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GPIO_IsOutputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask)
|
||||
{
|
||||
return ((READ_BIT(GPIOx->ODR, PinMask) == (PinMask)) ? 1UL : 0UL);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set several pins to high level on dedicated gpio port.
|
||||
* @rmtoll BSRR BSy LL_GPIO_SetOutputPin
|
||||
* @param GPIOx GPIO Port
|
||||
* @param PinMask This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @arg @ref LL_GPIO_PIN_ALL
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_SetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
|
||||
{
|
||||
WRITE_REG(GPIOx->BSRR, PinMask);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Set several pins to low level on dedicated gpio port.
|
||||
* @rmtoll BRR BRy LL_GPIO_ResetOutputPin
|
||||
* @param GPIOx GPIO Port
|
||||
* @param PinMask This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @arg @ref LL_GPIO_PIN_ALL
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_ResetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
|
||||
{
|
||||
WRITE_REG(GPIOx->BRR, PinMask);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Toggle data value for several pin of dedicated port.
|
||||
* @rmtoll ODR ODy LL_GPIO_TogglePin
|
||||
* @param GPIOx GPIO Port
|
||||
* @param PinMask This parameter can be a combination of the following values:
|
||||
* @arg @ref LL_GPIO_PIN_0
|
||||
* @arg @ref LL_GPIO_PIN_1
|
||||
* @arg @ref LL_GPIO_PIN_2
|
||||
* @arg @ref LL_GPIO_PIN_3
|
||||
* @arg @ref LL_GPIO_PIN_4
|
||||
* @arg @ref LL_GPIO_PIN_5
|
||||
* @arg @ref LL_GPIO_PIN_6
|
||||
* @arg @ref LL_GPIO_PIN_7
|
||||
* @arg @ref LL_GPIO_PIN_8
|
||||
* @arg @ref LL_GPIO_PIN_9
|
||||
* @arg @ref LL_GPIO_PIN_10
|
||||
* @arg @ref LL_GPIO_PIN_11
|
||||
* @arg @ref LL_GPIO_PIN_12
|
||||
* @arg @ref LL_GPIO_PIN_13
|
||||
* @arg @ref LL_GPIO_PIN_14
|
||||
* @arg @ref LL_GPIO_PIN_15
|
||||
* @arg @ref LL_GPIO_PIN_ALL
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
|
||||
{
|
||||
uint32_t odr = READ_REG(GPIOx->ODR);
|
||||
WRITE_REG(GPIOx->BSRR, ((odr & PinMask) << 16u) | (~odr & PinMask));
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined(USE_FULL_LL_DRIVER)
|
||||
/** @defgroup GPIO_LL_EF_Init Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx);
|
||||
ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct);
|
||||
void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
#endif /* USE_FULL_LL_DRIVER */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32G0xx_LL_GPIO_H */
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,343 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32g0xx_ll_utils.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of UTILS LL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2018 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
@verbatim
|
||||
==============================================================================
|
||||
##### How to use this driver #####
|
||||
==============================================================================
|
||||
[..]
|
||||
The LL UTILS driver contains a set of generic APIs that can be
|
||||
used by user:
|
||||
(+) Device electronic signature
|
||||
(+) Timing functions
|
||||
(+) PLL configuration functions
|
||||
|
||||
@endverbatim
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32G0xx_LL_UTILS_H
|
||||
#define STM32G0xx_LL_UTILS_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32g0xx.h"
|
||||
|
||||
/** @addtogroup STM32G0xx_LL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup UTILS_LL UTILS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup UTILS_LL_Private_Constants UTILS Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Max delay can be used in LL_mDelay */
|
||||
#define LL_MAX_DELAY 0xFFFFFFFFU
|
||||
|
||||
/**
|
||||
* @brief Unique device ID register base address
|
||||
*/
|
||||
#define UID_BASE_ADDRESS UID_BASE
|
||||
|
||||
/**
|
||||
* @brief Flash size data register base address
|
||||
*/
|
||||
#define FLASHSIZE_BASE_ADDRESS FLASHSIZE_BASE
|
||||
|
||||
/**
|
||||
* @brief Package data register base address
|
||||
*/
|
||||
#define PACKAGE_BASE_ADDRESS PACKAGE_BASE
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup UTILS_LL_Private_Macros UTILS Private Macros
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup UTILS_LL_ES_INIT UTILS Exported structures
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief UTILS PLL structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t PLLM; /*!< Division factor for PLL VCO input clock.
|
||||
This parameter can be a value of @ref RCC_LL_EC_PLLM_DIV
|
||||
|
||||
This feature can be modified afterwards using unitary function
|
||||
@ref LL_RCC_PLL_ConfigDomain_SYS(). */
|
||||
|
||||
uint32_t PLLN; /*!< Multiplication factor for PLL VCO output clock.
|
||||
This parameter must be a number between Min_Data = 8 and Max_Data = 86
|
||||
|
||||
This feature can be modified afterwards using unitary function
|
||||
@ref LL_RCC_PLL_ConfigDomain_SYS(). */
|
||||
|
||||
uint32_t PLLR; /*!< Division for the main system clock.
|
||||
This parameter can be a value of @ref RCC_LL_EC_PLLR_DIV
|
||||
|
||||
This feature can be modified afterwards using unitary function
|
||||
@ref LL_RCC_PLL_ConfigDomain_SYS(). */
|
||||
} LL_UTILS_PLLInitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief UTILS System, AHB and APB buses clock configuration structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
|
||||
This parameter can be a value of @ref RCC_LL_EC_SYSCLK_DIV
|
||||
|
||||
This feature can be modified afterwards using unitary function
|
||||
@ref LL_RCC_SetAHBPrescaler(). */
|
||||
|
||||
uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
|
||||
This parameter can be a value of @ref RCC_LL_EC_APB1_DIV
|
||||
|
||||
This feature can be modified afterwards using unitary function
|
||||
@ref LL_RCC_SetAPB1Prescaler(). */
|
||||
} LL_UTILS_ClkInitTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup UTILS_LL_Exported_Constants UTILS Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup UTILS_EC_HSE_BYPASS HSE Bypass activation
|
||||
* @{
|
||||
*/
|
||||
#define LL_UTILS_HSEBYPASS_OFF 0x00000000U /*!< HSE Bypass is not enabled */
|
||||
#define LL_UTILS_HSEBYPASS_ON 0x00000001U /*!< HSE Bypass is enabled */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UTILS_EC_PACKAGETYPE PACKAGE TYPE
|
||||
* @{
|
||||
*/
|
||||
#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
|
||||
#define LL_UTILS_PACKAGETYPE_QFP100 0x00000000U /*!< LQFP100 package type */
|
||||
#define LL_UTILS_PACKAGETYPE_QFN32_GP 0x00000001U /*!< LQFP32/UFQFPN32 General purpose (GP) */
|
||||
#define LL_UTILS_PACKAGETYPE_QFN32_N 0x00000002U /*!< LQFP32/UFQFPN32 N-version */
|
||||
#define LL_UTILS_PACKAGETYPE_QFN48_GP 0x00000004U /*!< LQFP48/UFQPN48 General purpose (GP) */
|
||||
#define LL_UTILS_PACKAGETYPE_QFN48_N 0x00000005U /*!< LQFP48/UFQPN48 N-version */
|
||||
#define LL_UTILS_PACKAGETYPE_WLCSP52 0x00000006U /*!< WLCSP52 */
|
||||
#define LL_UTILS_PACKAGETYPE_QFN64_GP 0x00000007U /*!< LQFP64 General purpose (GP) */
|
||||
#define LL_UTILS_PACKAGETYPE_QFN64_N 0x00000008U /*!< LQFP64 N-version */
|
||||
#define LL_UTILS_PACKAGETYPE_BGA64_N 0x0000000AU /*!< UFBGA64 N-version */
|
||||
#define LL_UTILS_PACKAGETYPE_QFP80 0x0000000BU /*!< LQFP80 package type */
|
||||
#define LL_UTILS_PACKAGETYPE_BGA100 0x0000000CU /*!< UBGA100 package type */
|
||||
#elif defined(STM32G061xx) || defined(STM32G051xx) || defined(STM32G050xx) || defined(STM32G041xx) || defined(STM32G031xx) || defined(STM32G030xx)
|
||||
#define LL_UTILS_PACKAGETYPE_SO8 0x00000001U /*!< SO8 package type */
|
||||
#define LL_UTILS_PACKAGETYPE_WLCSP18 0x00000002U /*!< WLCSP18 package type */
|
||||
#define LL_UTILS_PACKAGETYPE_TSSOP20 0x00000003U /*!< TSSOP20 package type */
|
||||
#define LL_UTILS_PACKAGETYPE_QFP28 0x00000004U /*!< UFQFPN28 package type */
|
||||
#define LL_UTILS_PACKAGETYPE_QFN32 0x00000005U /*!< UFQFPN32 / LQFP32 package type */
|
||||
#define LL_UTILS_PACKAGETYPE_QFN48 0x00000007U /*!< UFQFPN48 / LQFP48 package type */
|
||||
#elif defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G070xx)
|
||||
#define LL_UTILS_PACKAGETYPE_QFN28_GP 0x00000000U /*!< UFQFPN28 general purpose (GP) package type */
|
||||
#define LL_UTILS_PACKAGETYPE_QFN28_PD 0x00000001U /*!< UFQFPN28 Power Delivery (PD) */
|
||||
#define LL_UTILS_PACKAGETYPE_QFN32_GP 0x00000004U /*!< UFQFPN32 / LQFP32 general purpose (GP) package type */
|
||||
#define LL_UTILS_PACKAGETYPE_QFN32_PD 0x00000005U /*!< UFQFPN32 / LQFP32 Power Delivery (PD) package type */
|
||||
#define LL_UTILS_PACKAGETYPE_QFN48 0x00000008U /*!< UFQFPN48 / LQFP488 package type */
|
||||
#define LL_UTILS_PACKAGETYPE_QFP64 0x0000000CU /*!< LQPF64 package type */
|
||||
#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup UTILS_LL_Exported_Functions UTILS Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup UTILS_EF_DEVICE_ELECTRONIC_SIGNATURE DEVICE ELECTRONIC SIGNATURE
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Get Word0 of the unique device identifier (UID based on 96 bits)
|
||||
* @retval UID[31:0]: X and Y coordinates on the wafer expressed in BCD format
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GetUID_Word0(void)
|
||||
{
|
||||
return (uint32_t)(READ_REG(*((uint32_t *)UID_BASE_ADDRESS)));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Word1 of the unique device identifier (UID based on 96 bits)
|
||||
* @retval UID[63:32]: Wafer number (UID[39:32]) & LOT_NUM[23:0] (UID[63:40])
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GetUID_Word1(void)
|
||||
{
|
||||
return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 4U))));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Word2 of the unique device identifier (UID based on 96 bits)
|
||||
* @retval UID[95:64]: Lot number (ASCII encoded) - LOT_NUM[55:24]
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GetUID_Word2(void)
|
||||
{
|
||||
return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 8U))));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Flash memory size
|
||||
* @note This bitfield indicates the size of the device Flash memory expressed in
|
||||
* Kbytes. As an example, 0x040 corresponds to 64 Kbytes.
|
||||
* @retval FLASH_SIZE[15:0]: Flash memory size
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GetFlashSize(void)
|
||||
{
|
||||
return (uint32_t)(READ_REG(*((uint32_t *)FLASHSIZE_BASE_ADDRESS)) & 0x0000FFFFUL);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get Package type
|
||||
* @retval PKG[3:0]: Package type - This parameter can be a value of @ref UTILS_EC_PACKAGETYPE
|
||||
* @if defined(STM32G0C1xx)
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_QFP100
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_QFN32_GP
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_QFN32_N
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_QFN48_GP
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_QFN48_N
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_WLCSP52
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_QFN64_GP
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_QFN64_N
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_BGA64_N
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_QFP80
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_BGA100
|
||||
* @elif defined(STM32G061xx) || defined(STM32G041xx)
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_SO8
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_WLCSP18
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_TSSOP20
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_QFP28
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_QFN32
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_QFN48
|
||||
* @elif defined(STM32G081xx)
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_QFN28_GP
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_QFN28_PD
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_QFN32_GP
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_QFN32_PD
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_QFN48
|
||||
* @arg @ref LL_UTILS_PACKAGETYPE_QFP64
|
||||
* @endif
|
||||
*
|
||||
*/
|
||||
__STATIC_INLINE uint32_t LL_GetPackageType(void)
|
||||
{
|
||||
#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
|
||||
return (uint32_t)(READ_REG(*((uint32_t *)PACKAGE_BASE_ADDRESS)) & 0x1FU);
|
||||
#else
|
||||
return (uint32_t)(READ_REG(*((uint32_t *)PACKAGE_BASE_ADDRESS)) & 0xFU);
|
||||
#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UTILS_LL_EF_DELAY DELAY
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief This function configures the Cortex-M SysTick source of the time base.
|
||||
* @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro)
|
||||
* @note When a RTOS is used, it is recommended to avoid changing the SysTick
|
||||
* configuration by calling this function, for a delay use rather osDelay RTOS service.
|
||||
* @param Ticks Frequency of Ticks (Hz)
|
||||
* @retval None
|
||||
*/
|
||||
__STATIC_INLINE void LL_InitTick(uint32_t HCLKFrequency, uint32_t Ticks)
|
||||
{
|
||||
/* Configure the SysTick to have interrupt in 1ms time base */
|
||||
SysTick->LOAD = (uint32_t)((HCLKFrequency / Ticks) - 1UL); /* set reload register */
|
||||
SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
|
||||
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
|
||||
SysTick_CTRL_ENABLE_Msk; /* Enable the Systick Timer */
|
||||
}
|
||||
|
||||
void LL_Init1msTick(uint32_t HCLKFrequency);
|
||||
void LL_mDelay(uint32_t Delay);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup UTILS_EF_SYSTEM SYSTEM
|
||||
* @{
|
||||
*/
|
||||
|
||||
void LL_SetSystemCoreClock(uint32_t HCLKFrequency);
|
||||
ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct,
|
||||
LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
|
||||
ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass,
|
||||
LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
|
||||
ErrorStatus LL_SetFlashLatency(uint32_t HCLKFrequency);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32G0xx_LL_UTILS_H */
|
||||
Reference in New Issue
Block a user