1527 lines
50 KiB
C
1527 lines
50 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32g0xx_ll_pwr.h
|
|
* @author MCD Application Team
|
|
* @brief Header file of PWR LL module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2018 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef STM32G0xx_LL_PWR_H
|
|
#define STM32G0xx_LL_PWR_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32g0xx.h"
|
|
|
|
/** @addtogroup STM32G0xx_LL_Driver
|
|
* @{
|
|
*/
|
|
|
|
#if defined(PWR)
|
|
|
|
/** @defgroup PWR_LL PWR
|
|
* @{
|
|
*/
|
|
|
|
/* Private types -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
|
|
/* Private constants ---------------------------------------------------------*/
|
|
|
|
/* Private macros ------------------------------------------------------------*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/** @defgroup PWR_LL_Exported_Constants PWR Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup PWR_LL_EC_CLEAR_FLAG Clear Flags Defines
|
|
* @brief Flags defines which can be used with LL_PWR_WriteReg function
|
|
* @{
|
|
*/
|
|
#define LL_PWR_SCR_CSBF PWR_SCR_CSBF
|
|
#define LL_PWR_SCR_CWUF PWR_SCR_CWUF
|
|
#define LL_PWR_SCR_CWUF6 PWR_SCR_CWUF6
|
|
#define LL_PWR_SCR_CWUF5 PWR_SCR_CWUF5
|
|
#define LL_PWR_SCR_CWUF4 PWR_SCR_CWUF4
|
|
#if defined(PWR_CR3_EWUP3)
|
|
#define LL_PWR_SCR_CWUF3 PWR_SCR_CWUF3
|
|
#endif /* PWR_CR3_EWUP3 */
|
|
#define LL_PWR_SCR_CWUF2 PWR_SCR_CWUF2
|
|
#define LL_PWR_SCR_CWUF1 PWR_SCR_CWUF1
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWR_LL_EC_GET_FLAG Get Flags Defines
|
|
* @brief Flags defines which can be used with LL_PWR_ReadReg function
|
|
* @{
|
|
*/
|
|
#define LL_PWR_SR1_WUFI PWR_SR1_WUFI
|
|
#define LL_PWR_SR1_SBF PWR_SR1_SBF
|
|
#define LL_PWR_SR1_WUF6 PWR_SR1_WUF6
|
|
#define LL_PWR_SR1_WUF5 PWR_SR1_WUF5
|
|
#define LL_PWR_SR1_WUF4 PWR_SR1_WUF4
|
|
#if defined(PWR_CR3_EWUP3)
|
|
#define LL_PWR_SR1_WUF3 PWR_SR1_WUF3
|
|
#endif /* PWR_CR3_EWUP3 */
|
|
#define LL_PWR_SR1_WUF2 PWR_SR1_WUF2
|
|
#define LL_PWR_SR1_WUF1 PWR_SR1_WUF1
|
|
#if defined(PWR_SR2_PVDO)
|
|
#define LL_PWR_SR2_PVDO PWR_SR2_PVDO
|
|
#endif /* PWR_SR2_PVDO */
|
|
#define LL_PWR_SR2_VOSF PWR_SR2_VOSF
|
|
#define LL_PWR_SR2_REGLPF PWR_SR2_REGLPF
|
|
#define LL_PWR_SR2_REGLPS PWR_SR2_REGLPS
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWR_LL_EC_REGU_VOLTAGE REGU VOLTAGE
|
|
* @{
|
|
*/
|
|
#define LL_PWR_REGU_VOLTAGE_SCALE1 PWR_CR1_VOS_0
|
|
#define LL_PWR_REGU_VOLTAGE_SCALE2 PWR_CR1_VOS_1
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWR_LL_EC_MODE_PWR MODE PWR
|
|
* @{
|
|
*/
|
|
#define LL_PWR_MODE_STOP0 (0x00000000UL)
|
|
#define LL_PWR_MODE_STOP1 (PWR_CR1_LPMS_0)
|
|
#define LL_PWR_MODE_STANDBY (PWR_CR1_LPMS_1|PWR_CR1_LPMS_0)
|
|
#if defined (PWR_CR1_LPMS_2)
|
|
#define LL_PWR_MODE_SHUTDOWN (PWR_CR1_LPMS_2)
|
|
#endif /* PWR_CR1_LPMS_2 */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#if defined(PWR_CR2_PVDE)
|
|
/** @defgroup PWR_LL_EC_PVDLEVEL PVDLEVEL
|
|
* @{
|
|
*/
|
|
#define LL_PWR_PVDLLEVEL_0 0x000000000u /* VPVD0 > 2.05 V */
|
|
#define LL_PWR_PVDLLEVEL_1 (PWR_CR2_PVDFT_0) /* VPVD0 > 2.2 V */
|
|
#define LL_PWR_PVDLLEVEL_2 (PWR_CR2_PVDFT_1) /* VPVD1 > 2.36 V */
|
|
#define LL_PWR_PVDLLEVEL_3 (PWR_CR2_PVDFT_1 | PWR_CR2_PVDFT_0) /* VPVD2 > 2.52 V */
|
|
#define LL_PWR_PVDLLEVEL_4 (PWR_CR2_PVDFT_2) /* VPVD3 > 2.64 V */
|
|
#define LL_PWR_PVDLLEVEL_5 (PWR_CR2_PVDFT_2 | PWR_CR2_PVDFT_0) /* VPVD4 > 2.81 V */
|
|
#define LL_PWR_PVDLLEVEL_6 (PWR_CR2_PVDFT_2 | PWR_CR2_PVDFT_1) /* VPVD5 > 2.91 V */
|
|
|
|
#define LL_PWR_PVDHLEVEL_0 0x00000000u /* VPDD0 > 2.15 V */
|
|
#define LL_PWR_PVDHLEVEL_1 (PWR_CR2_PVDRT_0) /* VPVD1 > 2.3 V */
|
|
#define LL_PWR_PVDHLEVEL_2 (PWR_CR2_PVDRT_1) /* VPVD1 > 2.46 V */
|
|
#define LL_PWR_PVDHLEVEL_3 (PWR_CR2_PVDRT_1 | PWR_CR2_PVDRT_0) /* VPVD2 > 2.62 V */
|
|
#define LL_PWR_PVDHLEVEL_4 (PWR_CR2_PVDRT_2) /* VPVD3 > 2.74 V */
|
|
#define LL_PWR_PVDHLEVEL_5 (PWR_CR2_PVDRT_2 | PWR_CR2_PVDRT_0) /* VPVD4 > 2.91 V */
|
|
#define LL_PWR_PVDHLEVEL_6 (PWR_CR2_PVDRT_2 | PWR_CR2_PVDRT_1) /* VPVD5 > 3.01 V */
|
|
#define LL_PWR_PVDHLEVEL_7 (PWR_CR2_PVDRT_2 | PWR_CR2_PVDRT_1 | PWR_CR2_PVDRT_0) /* External input analog voltage (Compare internally to VREFINT) */
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* PWR_CR2_PVDE */
|
|
|
|
#if defined(PWR_PVM_SUPPORT)
|
|
/** @defgroup PWR_LL_EC_PVM_IP PVM_IP
|
|
* @{
|
|
*/
|
|
#define LL_PWR_PVM_USB PWR_CR2_PVMEN_USB /*!< Peripheral Voltage Monitoring enable for USB peripheral: Enable to keep the USB peripheral voltage monitoring under control (power domain Vddio2) */
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* PWR_PVM_SUPPORT */
|
|
|
|
/** @defgroup PWR_LL_EC_WAKEUP WAKEUP
|
|
* @{
|
|
*/
|
|
#define LL_PWR_WAKEUP_PIN1 (PWR_CR3_EWUP1)
|
|
#define LL_PWR_WAKEUP_PIN2 (PWR_CR3_EWUP2)
|
|
#if defined(PWR_CR3_EWUP3)
|
|
#define LL_PWR_WAKEUP_PIN3 (PWR_CR3_EWUP3)
|
|
#endif /* PWR_CR3_EWUP3 */
|
|
#define LL_PWR_WAKEUP_PIN4 (PWR_CR3_EWUP4)
|
|
#if defined(PWR_CR3_EWUP5)
|
|
#define LL_PWR_WAKEUP_PIN5 (PWR_CR3_EWUP5)
|
|
#endif /* PWR_CR3_EWUP5 */
|
|
#define LL_PWR_WAKEUP_PIN6 (PWR_CR3_EWUP6)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWR_LL_EC_BATT_CHARG_RESISTOR BATT CHARG RESISTOR
|
|
* @{
|
|
*/
|
|
#define LL_PWR_BATTCHARG_RESISTOR_5K 0x000000000u
|
|
#define LL_PWR_BATTCHARG_RESISTOR_1_5K (PWR_CR4_VBRS)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWR_LL_EC_GPIO GPIO
|
|
* @{
|
|
*/
|
|
#define LL_PWR_GPIO_A ((uint32_t)(&(PWR->PUCRA)))
|
|
#define LL_PWR_GPIO_B ((uint32_t)(&(PWR->PUCRB)))
|
|
#define LL_PWR_GPIO_C ((uint32_t)(&(PWR->PUCRC)))
|
|
#define LL_PWR_GPIO_D ((uint32_t)(&(PWR->PUCRD)))
|
|
#if defined(GPIOE)
|
|
#define LL_PWR_GPIO_E ((uint32_t)(&(PWR->PUCRE)))
|
|
#endif /* GPIOE */
|
|
#define LL_PWR_GPIO_F ((uint32_t)(&(PWR->PUCRF)))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWR_LL_EC_GPIO_BIT GPIO BIT
|
|
* @{
|
|
*/
|
|
#define LL_PWR_GPIO_BIT_0 0x00000001u
|
|
#define LL_PWR_GPIO_BIT_1 0x00000002u
|
|
#define LL_PWR_GPIO_BIT_2 0x00000004u
|
|
#define LL_PWR_GPIO_BIT_3 0x00000008u
|
|
#define LL_PWR_GPIO_BIT_4 0x00000010u
|
|
#define LL_PWR_GPIO_BIT_5 0x00000020u
|
|
#define LL_PWR_GPIO_BIT_6 0x00000040u
|
|
#define LL_PWR_GPIO_BIT_7 0x00000080u
|
|
#define LL_PWR_GPIO_BIT_8 0x00000100u
|
|
#define LL_PWR_GPIO_BIT_9 0x00000200u
|
|
#define LL_PWR_GPIO_BIT_10 0x00000400u
|
|
#define LL_PWR_GPIO_BIT_11 0x00000800u
|
|
#define LL_PWR_GPIO_BIT_12 0x00001000u
|
|
#define LL_PWR_GPIO_BIT_13 0x00002000u
|
|
#define LL_PWR_GPIO_BIT_14 0x00004000u
|
|
#define LL_PWR_GPIO_BIT_15 0x00008000u
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
/** @defgroup PWR_LL_Exported_Macros PWR Exported Macros
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup PWR_LL_EM_WRITE_READ Common Write and read registers Macros
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Write a value in PWR register
|
|
* @param __REG__ Register to be written
|
|
* @param __VALUE__ Value to be written in the register
|
|
* @retval None
|
|
*/
|
|
#define LL_PWR_WriteReg(__REG__, __VALUE__) WRITE_REG(PWR->__REG__, (__VALUE__))
|
|
|
|
/**
|
|
* @brief Read a value in PWR register
|
|
* @param __REG__ Register to be read
|
|
* @retval Register value
|
|
*/
|
|
#define LL_PWR_ReadReg(__REG__) READ_REG(PWR->__REG__)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @defgroup PWR_LL_Exported_Functions PWR Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup PWR_LL_EF_Configuration Configuration
|
|
* @{
|
|
*/
|
|
/**
|
|
* @brief Set the main internal regulator output voltage
|
|
* @rmtoll CR1 VOS LL_PWR_SetRegulVoltageScaling
|
|
* @param VoltageScaling This parameter can be one of the following values:
|
|
* @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1
|
|
* @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_SetRegulVoltageScaling(uint32_t VoltageScaling)
|
|
{
|
|
MODIFY_REG(PWR->CR1, PWR_CR1_VOS, VoltageScaling);
|
|
}
|
|
|
|
/**
|
|
* @brief Get the main internal regulator output voltage
|
|
* @rmtoll CR1 VOS LL_PWR_GetRegulVoltageScaling
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1
|
|
* @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_GetRegulVoltageScaling(void)
|
|
{
|
|
return (READ_BIT(PWR->CR1, PWR_CR1_VOS));
|
|
}
|
|
|
|
/**
|
|
* @brief Switch the regulator from main mode to low-power mode
|
|
* @rmtoll CR1 LPR LL_PWR_EnableLowPowerRunMode
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_EnableLowPowerRunMode(void)
|
|
{
|
|
SET_BIT(PWR->CR1, PWR_CR1_LPR);
|
|
}
|
|
|
|
/**
|
|
* @brief Switch the regulator from low-power mode to main mode
|
|
* @rmtoll CR1 LPR LL_PWR_DisableLowPowerRunMode
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_DisableLowPowerRunMode(void)
|
|
{
|
|
CLEAR_BIT(PWR->CR1, PWR_CR1_LPR);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if the regulator is in low-power mode
|
|
* @rmtoll CR1 LPR LL_PWR_IsEnabledLowPowerRunMode
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsEnabledLowPowerRunMode(void)
|
|
{
|
|
return ((READ_BIT(PWR->CR1, PWR_CR1_LPR) == (PWR_CR1_LPR)) ? 1UL : 0UL);
|
|
}
|
|
|
|
/**
|
|
* @brief Switch from run main mode to run low-power mode.
|
|
* @rmtoll CR1 LPR LL_PWR_EnterLowPowerRunMode
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_EnterLowPowerRunMode(void)
|
|
{
|
|
LL_PWR_EnableLowPowerRunMode();
|
|
}
|
|
|
|
/**
|
|
* @brief Switch from run main mode to low-power mode.
|
|
* @rmtoll CR1 LPR LL_PWR_ExitLowPowerRunMode
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_ExitLowPowerRunMode(void)
|
|
{
|
|
LL_PWR_DisableLowPowerRunMode();
|
|
}
|
|
|
|
/**
|
|
* @brief Enable access to the backup domain
|
|
* @rmtoll CR1 DBP LL_PWR_EnableBkUpAccess
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_EnableBkUpAccess(void)
|
|
{
|
|
SET_BIT(PWR->CR1, PWR_CR1_DBP);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable access to the backup domain
|
|
* @rmtoll CR1 DBP LL_PWR_DisableBkUpAccess
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_DisableBkUpAccess(void)
|
|
{
|
|
CLEAR_BIT(PWR->CR1, PWR_CR1_DBP);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if the backup domain is enabled
|
|
* @rmtoll CR1 DBP LL_PWR_IsEnabledBkUpAccess
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpAccess(void)
|
|
{
|
|
return ((READ_BIT(PWR->CR1, PWR_CR1_DBP) == (PWR_CR1_DBP)) ? 1UL : 0UL);
|
|
}
|
|
|
|
/**
|
|
* @brief Enable Flash Power-down mode during low power sleep mode
|
|
* @rmtoll CR1 CFIPD_SLP LL_PWR_EnableFlashPowerDownInLPSleep
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_EnableFlashPowerDownInLPSleep(void)
|
|
{
|
|
SET_BIT(PWR->CR1, PWR_CR1_FPD_LPSLP);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable Flash Power-down mode during Low power sleep mode
|
|
* @rmtoll CR1 CFIPD_SLP LL_PWR_DisableFlashPowerDownInLPSleep
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_DisableFlashPowerDownInLPSleep(void)
|
|
{
|
|
CLEAR_BIT(PWR->CR1, PWR_CR1_FPD_LPSLP);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if flash power-down mode during low power sleep mode domain is enabled
|
|
* @rmtoll CR1 CFIPD_SLP LL_PWR_IsEnableFlashPowerDownInLPSleep
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsEnableFlashPowerDownInLPSleep(void)
|
|
{
|
|
return ((READ_BIT(PWR->CR1, PWR_CR1_FPD_LPSLP) == (PWR_CR1_FPD_LPSLP)) ? 1UL : 0UL);
|
|
}
|
|
|
|
/**
|
|
* @brief Enable Flash Power-down mode during low power run mode
|
|
* @rmtoll CR1 CFIPD_RUN LL_PWR_EnableFlashPowerDownInLPRun
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_EnableFlashPowerDownInLPRun(void)
|
|
{
|
|
SET_BIT(PWR->CR1, PWR_CR1_FPD_LPRUN);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable Flash Power-down mode during Low power run mode
|
|
* @rmtoll CR1 CFIPD_RUN LL_PWR_DisableFlashPowerDownInLPRun
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_DisableFlashPowerDownInLPRun(void)
|
|
{
|
|
CLEAR_BIT(PWR->CR1, PWR_CR1_FPD_LPRUN);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if flash power-down mode during low power run mode domain is enabled
|
|
* @rmtoll CR1 CFIPD_RUN LL_PWR_IsEnableFlashPowerDownInLPRun
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsEnableFlashPowerDownInLPRun(void)
|
|
{
|
|
return ((READ_BIT(PWR->CR1, PWR_CR1_FPD_LPRUN) == (PWR_CR1_FPD_LPRUN)) ? 1UL : 0UL);
|
|
}
|
|
|
|
/**
|
|
* @brief Enable Flash Power-down mode during stop mode
|
|
* @rmtoll CR1 CFIPD_STOP LL_PWR_EnableFlashPowerDownInStop
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_EnableFlashPowerDownInStop(void)
|
|
{
|
|
SET_BIT(PWR->CR1, PWR_CR1_FPD_STOP);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable Flash Power-down mode during stop mode
|
|
* @rmtoll CR1 CFIPD_STOP LL_PWR_DisableFlashPowerDownInStop
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_DisableFlashPowerDownInStop(void)
|
|
{
|
|
CLEAR_BIT(PWR->CR1, PWR_CR1_FPD_STOP);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if flash power-down mode during stop mode domain is enabled
|
|
* @rmtoll CR1 CFIPD_STOP LL_PWR_IsEnableFlashPowerDownInStop
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsEnableFlashPowerDownInStop(void)
|
|
{
|
|
return ((READ_BIT(PWR->CR1, PWR_CR1_FPD_STOP) == (PWR_CR1_FPD_STOP)) ? 1UL : 0UL);
|
|
}
|
|
|
|
#if defined(STM32G0C1xx) || defined(STM32G0B1xx)
|
|
/**
|
|
* @brief Enable VDDIO2 supply
|
|
* @rmtoll CR2 IOSV LL_PWR_EnableVddIO2
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_EnableVddIO2(void)
|
|
{
|
|
SET_BIT(PWR->CR2, PWR_CR2_IOSV);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable VDDIO2 supply
|
|
* @rmtoll CR2 IOSV LL_PWR_DisableVddIO2
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_DisableVddIO2(void)
|
|
{
|
|
CLEAR_BIT(PWR->CR2, PWR_CR2_IOSV);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if VDDIO2 supply is enabled
|
|
* @rmtoll CR2 IOSV LL_PWR_IsEnabledVddIO2
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsEnabledVddIO2(void)
|
|
{
|
|
return ((READ_BIT(PWR->CR2, PWR_CR2_IOSV) == (PWR_CR2_IOSV)) ? 1UL : 0UL);
|
|
}
|
|
|
|
/**
|
|
* @brief Enable VDDUSB supply
|
|
* @rmtoll CR2 USV LL_PWR_EnableVddUSB
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_EnableVddUSB(void)
|
|
{
|
|
SET_BIT(PWR->CR2, PWR_CR2_USV);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable VDDUSB supply
|
|
* @rmtoll CR2 USV LL_PWR_DisableVddUSB
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_DisableVddUSB(void)
|
|
{
|
|
CLEAR_BIT(PWR->CR2, PWR_CR2_USV);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if VDDUSB supply is enabled
|
|
* @rmtoll CR2 USV LL_PWR_IsEnabledVddUSB
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsEnabledVddUSB(void)
|
|
{
|
|
return ((READ_BIT(PWR->CR2, PWR_CR2_USV) == (PWR_CR2_USV)) ? 1UL : 0UL);
|
|
}
|
|
#endif /* STM32G0C1xx || STM32G0B1xx */
|
|
|
|
#if defined (PWR_PVM_SUPPORT)
|
|
/**
|
|
* @brief Enable the Power Voltage Monitoring on a peripheral
|
|
* @rmtoll CR2 PVMUSB LL_PWR_EnablePVM
|
|
* @param PeriphVoltage This parameter can be one of the following values:
|
|
* @arg @ref LL_PWR_PVM_USB (*)
|
|
*
|
|
* (*) value not defined in all devices
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_EnablePVM(uint32_t PeriphVoltage)
|
|
{
|
|
SET_BIT(PWR->CR2, PeriphVoltage);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable the Power Voltage Monitoring on a peripheral
|
|
* @rmtoll CR2 PVMUSB LL_PWR_DisablePVM
|
|
* @param PeriphVoltage This parameter can be one of the following values:
|
|
* @arg @ref LL_PWR_PVM_USB (*)
|
|
*
|
|
* (*) value not defined in all devices
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_DisablePVM(uint32_t PeriphVoltage)
|
|
{
|
|
CLEAR_BIT(PWR->CR2, PeriphVoltage);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if Power Voltage Monitoring is enabled on a peripheral
|
|
* @rmtoll CR2 PVMUSB LL_PWR_IsEnabledPVM
|
|
* @param PeriphVoltage This parameter can be one of the following values:
|
|
* @arg @ref LL_PWR_PVM_USB (*)
|
|
*
|
|
* (*) value not defined in all devices
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVM(uint32_t PeriphVoltage)
|
|
{
|
|
return ((READ_BIT(PWR->CR2, PeriphVoltage) == (PeriphVoltage)) ? 1UL : 0UL);
|
|
}
|
|
#endif /* PWR_PVM_SUPPORT */
|
|
|
|
/**
|
|
* @brief Set Low-Power mode
|
|
* @rmtoll CR1 LPMS LL_PWR_SetPowerMode
|
|
* @param LowPowerMode This parameter can be one of the following values:
|
|
* @arg @ref LL_PWR_MODE_STOP0
|
|
* @arg @ref LL_PWR_MODE_STOP1
|
|
* @arg @ref LL_PWR_MODE_STANDBY
|
|
* @arg @ref LL_PWR_MODE_SHUTDOWN
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_SetPowerMode(uint32_t LowPowerMode)
|
|
{
|
|
MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, LowPowerMode);
|
|
}
|
|
|
|
/**
|
|
* @brief Get Low-Power mode
|
|
* @rmtoll CR1 LPMS LL_PWR_GetPowerMode
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_PWR_MODE_STOP0
|
|
* @arg @ref LL_PWR_MODE_STOP1
|
|
* @arg @ref LL_PWR_MODE_STANDBY
|
|
* @arg @ref LL_PWR_MODE_SHUTDOWN
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_GetPowerMode(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(PWR->CR1, PWR_CR1_LPMS));
|
|
}
|
|
|
|
#if defined (PWR_CR2_PVDE)
|
|
/**
|
|
* @brief Configure the high voltage threshold detected by the Power Voltage Detector
|
|
* @rmtoll CR2 PLS LL_PWR_SetPVDHighLevel
|
|
* @param PVDHighLevel This parameter can be one of the following values:
|
|
* @arg @ref LL_PWR_PVDHLEVEL_0
|
|
* @arg @ref LL_PWR_PVDHLEVEL_1
|
|
* @arg @ref LL_PWR_PVDHLEVEL_2
|
|
* @arg @ref LL_PWR_PVDHLEVEL_3
|
|
* @arg @ref LL_PWR_PVDHLEVEL_4
|
|
* @arg @ref LL_PWR_PVDHLEVEL_5
|
|
* @arg @ref LL_PWR_PVDHLEVEL_6
|
|
* @arg @ref LL_PWR_PVDHLEVEL_7
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_SetPVDHighLevel(uint32_t PVDHighLevel)
|
|
{
|
|
MODIFY_REG(PWR->CR2, PWR_CR2_PVDRT, PVDHighLevel);
|
|
}
|
|
|
|
/**
|
|
* @brief Get the voltage threshold detection
|
|
* @rmtoll CR2 PLS LL_PWR_GetPVDHighLevel
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_PWR_PVDHLEVEL_0
|
|
* @arg @ref LL_PWR_PVDHLEVEL_1
|
|
* @arg @ref LL_PWR_PVDHLEVEL_2
|
|
* @arg @ref LL_PWR_PVDHLEVEL_3
|
|
* @arg @ref LL_PWR_PVDHLEVEL_4
|
|
* @arg @ref LL_PWR_PVDHLEVEL_5
|
|
* @arg @ref LL_PWR_PVDHLEVEL_6
|
|
* @arg @ref LL_PWR_PVDHLEVEL_7
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_GetPVDHighLevel(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(PWR->CR2, PWR_CR2_PVDRT));
|
|
}
|
|
/**
|
|
* @brief Configure the low voltage threshold detected by the Power Voltage Detector
|
|
* @rmtoll CR2 PLS LL_PWR_SetPVDLowLevel
|
|
* @param PVDLowLevel This parameter can be one of the following values:
|
|
* @arg @ref LL_PWR_PVDLLEVEL_0
|
|
* @arg @ref LL_PWR_PVDLLEVEL_1
|
|
* @arg @ref LL_PWR_PVDLLEVEL_2
|
|
* @arg @ref LL_PWR_PVDLLEVEL_3
|
|
* @arg @ref LL_PWR_PVDLLEVEL_4
|
|
* @arg @ref LL_PWR_PVDLLEVEL_5
|
|
* @arg @ref LL_PWR_PVDLLEVEL_6
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_SetPVDLowLevel(uint32_t PVDLowLevel)
|
|
{
|
|
MODIFY_REG(PWR->CR2, PWR_CR2_PVDFT, PVDLowLevel);
|
|
}
|
|
|
|
/**
|
|
* @brief Get the low voltage threshold detection
|
|
* @rmtoll CR2 PLS LL_PWR_GetPVDLowLevel
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_PWR_PVDLLEVEL_0
|
|
* @arg @ref LL_PWR_PVDLLEVEL_1
|
|
* @arg @ref LL_PWR_PVDLLEVEL_2
|
|
* @arg @ref LL_PWR_PVDLLEVEL_3
|
|
* @arg @ref LL_PWR_PVDLLEVEL_4
|
|
* @arg @ref LL_PWR_PVDLLEVEL_5
|
|
* @arg @ref LL_PWR_PVDLLEVEL_6
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_GetPVDLowLevel(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(PWR->CR2, PWR_CR2_PVDFT));
|
|
}
|
|
|
|
/**
|
|
* @brief Enable Power Voltage Detector
|
|
* @rmtoll CR2 PVDE LL_PWR_EnablePVD
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_EnablePVD(void)
|
|
{
|
|
SET_BIT(PWR->CR2, PWR_CR2_PVDE);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable Power Voltage Detector
|
|
* @rmtoll CR2 PVDE LL_PWR_DisablePVD
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_DisablePVD(void)
|
|
{
|
|
CLEAR_BIT(PWR->CR2, PWR_CR2_PVDE);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if Power Voltage Detector is enabled
|
|
* @rmtoll CR2 PVDE LL_PWR_IsEnabledPVD
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVD(void)
|
|
{
|
|
return ((READ_BIT(PWR->CR2, PWR_CR2_PVDE) == (PWR_CR2_PVDE)) ? 1UL : 0UL);
|
|
}
|
|
#endif /* PWR_CR2_PVDE */
|
|
|
|
/**
|
|
* @brief Enable Internal Wake-up line
|
|
* @rmtoll CR3 EIWF LL_PWR_EnableInternWU
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_EnableInternWU(void)
|
|
{
|
|
SET_BIT(PWR->CR3, PWR_CR3_EIWUL);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable Internal Wake-up line
|
|
* @rmtoll CR3 EIWF LL_PWR_DisableInternWU
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_DisableInternWU(void)
|
|
{
|
|
CLEAR_BIT(PWR->CR3, PWR_CR3_EIWUL);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if Internal Wake-up line is enabled
|
|
* @rmtoll CR3 EIWF LL_PWR_IsEnabledInternWU
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsEnabledInternWU(void)
|
|
{
|
|
return ((READ_BIT(PWR->CR3, PWR_CR3_EIWUL) == (PWR_CR3_EIWUL)) ? 1UL : 0UL);
|
|
}
|
|
|
|
/**
|
|
* @brief Enable pull-up and pull-down configuration
|
|
* @rmtoll CR3 APC LL_PWR_EnablePUPDCfg
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_EnablePUPDCfg(void)
|
|
{
|
|
SET_BIT(PWR->CR3, PWR_CR3_APC);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable pull-up and pull-down configuration
|
|
* @rmtoll CR3 APC LL_PWR_DisablePUPDCfg
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_DisablePUPDCfg(void)
|
|
{
|
|
CLEAR_BIT(PWR->CR3, PWR_CR3_APC);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if pull-up and pull-down configuration is enabled
|
|
* @rmtoll CR3 APC LL_PWR_IsEnabledPUPDCfg
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsEnabledPUPDCfg(void)
|
|
{
|
|
return ((READ_BIT(PWR->CR3, PWR_CR3_APC) == (PWR_CR3_APC)) ? 1UL : 0UL);
|
|
}
|
|
|
|
#if defined(PWR_CR3_RRS)
|
|
/**
|
|
* @brief Enable SRAM content retention in Standby mode
|
|
* @rmtoll CR3 RRS LL_PWR_EnableSRAMRetention
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_EnableSRAMRetention(void)
|
|
{
|
|
SET_BIT(PWR->CR3, PWR_CR3_RRS);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable SRAM content retention in Standby mode
|
|
* @rmtoll CR3 RRS LL_PWR_DisableSRAMRetention
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_DisableSRAMRetention(void)
|
|
{
|
|
CLEAR_BIT(PWR->CR3, PWR_CR3_RRS);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if SRAM content retention in Standby mode is enabled
|
|
* @rmtoll CR3 RRS LL_PWR_IsEnabledSRAMRetention
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsEnabledSRAMRetention(void)
|
|
{
|
|
return ((READ_BIT(PWR->CR3, PWR_CR3_RRS) == (PWR_CR3_RRS)) ? 1UL : 0UL);
|
|
}
|
|
#endif /* PWR_CR3_RRS */
|
|
|
|
#if defined(PWR_CR3_ENB_ULP)
|
|
/**
|
|
* @brief Enable sampling mode of LPMMU reset block
|
|
* @rmtoll CR3 ENB_ULP LL_PWR_EnableLPMUResetSamplingMode
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_EnableLPMUResetSamplingMode(void)
|
|
{
|
|
SET_BIT(PWR->CR3, PWR_CR3_ENB_ULP);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable sampling mode of LPMMU reset block
|
|
* @rmtoll CR3 ENB_ULP LL_PWR_DisableLPMUResetSamplingMode
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_DisableLPMUResetSamplingMode(void)
|
|
{
|
|
CLEAR_BIT(PWR->CR3, PWR_CR3_ENB_ULP);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if sampling mode of LPMMU reset block
|
|
* @rmtoll CR3 ENB_ULP LL_PWR_IsEnableLPMUResetSamplingMode
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsEnableLPMUResetSamplingMode(void)
|
|
{
|
|
return ((READ_BIT(PWR->CR3, PWR_CR3_ENB_ULP) == (PWR_CR3_ENB_ULP)) ? 1UL : 0UL);
|
|
}
|
|
#endif /* PWR_CR3_ENB_ULP */
|
|
|
|
/**
|
|
* @brief Enable the WakeUp PINx functionality
|
|
* @rmtoll CR3 EWUP1 LL_PWR_EnableWakeUpPin\n
|
|
* CR3 EWUP2 LL_PWR_EnableWakeUpPin\n
|
|
* CR3 EWUP3 LL_PWR_EnableWakeUpPin\n
|
|
* CR3 EWUP4 LL_PWR_EnableWakeUpPin\n
|
|
* CR3 EWUP5 LL_PWR_EnableWakeUpPin\n
|
|
* CR3 EWUP6 LL_PWR_EnableWakeUpPin
|
|
* @param WakeUpPin This parameter can be one of the following values:
|
|
* @arg @ref LL_PWR_WAKEUP_PIN1
|
|
* @arg @ref LL_PWR_WAKEUP_PIN2
|
|
* @arg @ref LL_PWR_WAKEUP_PIN3 (*)
|
|
* @arg @ref LL_PWR_WAKEUP_PIN4
|
|
* @arg @ref LL_PWR_WAKEUP_PIN5 (*)
|
|
* @arg @ref LL_PWR_WAKEUP_PIN6
|
|
* @retval None
|
|
* @note (*) availability depends on devices
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin)
|
|
{
|
|
SET_BIT(PWR->CR3, WakeUpPin);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable the WakeUp PINx functionality
|
|
* @rmtoll CR3 EWUP1 LL_PWR_DisableWakeUpPin\n
|
|
* CR3 EWUP2 LL_PWR_DisableWakeUpPin\n
|
|
* CR3 EWUP3 LL_PWR_DisableWakeUpPin\n
|
|
* CR3 EWUP4 LL_PWR_DisableWakeUpPin\n
|
|
* CR3 EWUP5 LL_PWR_DisableWakeUpPin\n
|
|
* CR3 EWUP6 LL_PWR_DisableWakeUpPin
|
|
* @param WakeUpPin This parameter can be one of the following values:
|
|
* @arg @ref LL_PWR_WAKEUP_PIN1
|
|
* @arg @ref LL_PWR_WAKEUP_PIN2
|
|
* @arg @ref LL_PWR_WAKEUP_PIN3 (*)
|
|
* @arg @ref LL_PWR_WAKEUP_PIN4
|
|
* @arg @ref LL_PWR_WAKEUP_PIN5 (*)
|
|
* @arg @ref LL_PWR_WAKEUP_PIN6
|
|
* @retval None
|
|
* @note (*) availability depends on devices
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin)
|
|
{
|
|
CLEAR_BIT(PWR->CR3, WakeUpPin);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if the WakeUp PINx functionality is enabled
|
|
* @rmtoll CR3 EWUP1 LL_PWR_IsEnabledWakeUpPin\n
|
|
* CR3 EWUP2 LL_PWR_IsEnabledWakeUpPin\n
|
|
* CR3 EWUP3 LL_PWR_IsEnabledWakeUpPin\n
|
|
* CR3 EWUP4 LL_PWR_IsEnabledWakeUpPin\n
|
|
* CR3 EWUP5 LL_PWR_IsEnabledWakeUpPin\n
|
|
* CR3 EWUP6 LL_PWR_IsEnabledWakeUpPin
|
|
* @param WakeUpPin This parameter can be one of the following values:
|
|
* @arg @ref LL_PWR_WAKEUP_PIN1
|
|
* @arg @ref LL_PWR_WAKEUP_PIN2
|
|
* @arg @ref LL_PWR_WAKEUP_PIN3 (*)
|
|
* @arg @ref LL_PWR_WAKEUP_PIN4
|
|
* @arg @ref LL_PWR_WAKEUP_PIN5 (*)
|
|
* @arg @ref LL_PWR_WAKEUP_PIN6
|
|
* @retval State of bit (1 or 0).
|
|
* @note (*) availability depends on devices
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin)
|
|
{
|
|
return ((READ_BIT(PWR->CR3, WakeUpPin) == (WakeUpPin)) ? 1UL : 0UL);
|
|
}
|
|
|
|
/**
|
|
* @brief Set the resistor impedance
|
|
* @rmtoll CR4 VBRS LL_PWR_SetBattChargResistor
|
|
* @param Resistor This parameter can be one of the following values:
|
|
* @arg @ref LL_PWR_BATTCHARG_RESISTOR_5K
|
|
* @arg @ref LL_PWR_BATTCHARG_RESISTOR_1_5K
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_SetBattChargResistor(uint32_t Resistor)
|
|
{
|
|
MODIFY_REG(PWR->CR4, PWR_CR4_VBRS, Resistor);
|
|
}
|
|
|
|
/**
|
|
* @brief Get the resistor impedance
|
|
* @rmtoll CR4 VBRS LL_PWR_GetBattChargResistor
|
|
* @retval Returned value can be one of the following values:
|
|
* @arg @ref LL_PWR_BATTCHARG_RESISTOR_5K
|
|
* @arg @ref LL_PWR_BATTCHARG_RESISTOR_1_5K
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_GetBattChargResistor(void)
|
|
{
|
|
return (uint32_t)(READ_BIT(PWR->CR4, PWR_CR4_VBRS));
|
|
}
|
|
|
|
/**
|
|
* @brief Enable battery charging
|
|
* @rmtoll CR4 VBE LL_PWR_EnableBatteryCharging
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_EnableBatteryCharging(void)
|
|
{
|
|
SET_BIT(PWR->CR4, PWR_CR4_VBE);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable battery charging
|
|
* @rmtoll CR4 VBE LL_PWR_DisableBatteryCharging
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_DisableBatteryCharging(void)
|
|
{
|
|
CLEAR_BIT(PWR->CR4, PWR_CR4_VBE);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if battery charging is enabled
|
|
* @rmtoll CR4 VBE LL_PWR_IsEnabledBatteryCharging
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsEnabledBatteryCharging(void)
|
|
{
|
|
return ((READ_BIT(PWR->CR4, PWR_CR4_VBE) == (PWR_CR4_VBE)) ? 1UL : 0UL);
|
|
}
|
|
|
|
/**
|
|
* @brief Set the Wake-Up pin polarity low for the event detection
|
|
* @rmtoll CR4 WP1 LL_PWR_SetWakeUpPinPolarityLow\n
|
|
* CR4 WP2 LL_PWR_SetWakeUpPinPolarityLow\n
|
|
* CR4 WP3 LL_PWR_SetWakeUpPinPolarityLow\n
|
|
* CR4 WP4 LL_PWR_SetWakeUpPinPolarityLow\n
|
|
* CR4 WP5 LL_PWR_SetWakeUpPinPolarityLow\n
|
|
* CR4 WP6 LL_PWR_SetWakeUpPinPolarityLow
|
|
* @param WakeUpPin This parameter can be one of the following values:
|
|
* @arg @ref LL_PWR_WAKEUP_PIN1
|
|
* @arg @ref LL_PWR_WAKEUP_PIN2
|
|
* @arg @ref LL_PWR_WAKEUP_PIN3 (*)
|
|
* @arg @ref LL_PWR_WAKEUP_PIN4
|
|
* @arg @ref LL_PWR_WAKEUP_PIN5 (*)
|
|
* @arg @ref LL_PWR_WAKEUP_PIN6
|
|
* @retval None
|
|
* @note (*) availability depends on devices
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityLow(uint32_t WakeUpPin)
|
|
{
|
|
SET_BIT(PWR->CR4, WakeUpPin);
|
|
}
|
|
|
|
/**
|
|
* @brief Set the Wake-Up pin polarity high for the event detection
|
|
* @rmtoll CR4 WP1 LL_PWR_SetWakeUpPinPolarityHigh\n
|
|
* CR4 WP2 LL_PWR_SetWakeUpPinPolarityHigh\n
|
|
* CR4 WP3 LL_PWR_SetWakeUpPinPolarityHigh\n
|
|
* CR4 WP4 LL_PWR_SetWakeUpPinPolarityHigh\n
|
|
* CR4 WP5 LL_PWR_SetWakeUpPinPolarityHigh\n
|
|
* CR4 WP6 LL_PWR_SetWakeUpPinPolarityHigh
|
|
* @param WakeUpPin This parameter can be one of the following values:
|
|
* @arg @ref LL_PWR_WAKEUP_PIN1
|
|
* @arg @ref LL_PWR_WAKEUP_PIN2
|
|
* @arg @ref LL_PWR_WAKEUP_PIN3 (*)
|
|
* @arg @ref LL_PWR_WAKEUP_PIN4
|
|
* @arg @ref LL_PWR_WAKEUP_PIN5 (*)
|
|
* @arg @ref LL_PWR_WAKEUP_PIN6
|
|
* @note (*) availability depends on devices
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityHigh(uint32_t WakeUpPin)
|
|
{
|
|
CLEAR_BIT(PWR->CR4, WakeUpPin);
|
|
}
|
|
|
|
/**
|
|
* @brief Get the Wake-Up pin polarity for the event detection
|
|
* @rmtoll CR4 WP1 LL_PWR_IsWakeUpPinPolarityLow\n
|
|
* CR4 WP2 LL_PWR_IsWakeUpPinPolarityLow\n
|
|
* CR4 WP3 LL_PWR_IsWakeUpPinPolarityLow\n
|
|
* CR4 WP4 LL_PWR_IsWakeUpPinPolarityLow\n
|
|
* CR4 WP5 LL_PWR_IsWakeUpPinPolarityLow\n
|
|
* CR4 WP6 LL_PWR_IsWakeUpPinPolarityLow
|
|
* @param WakeUpPin This parameter can be one of the following values:
|
|
* @arg @ref LL_PWR_WAKEUP_PIN1
|
|
* @arg @ref LL_PWR_WAKEUP_PIN2
|
|
* @arg @ref LL_PWR_WAKEUP_PIN3 (*)
|
|
* @arg @ref LL_PWR_WAKEUP_PIN4
|
|
* @arg @ref LL_PWR_WAKEUP_PIN5 (*)
|
|
* @arg @ref LL_PWR_WAKEUP_PIN6
|
|
* @note (*) availability depends on devices
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsWakeUpPinPolarityLow(uint32_t WakeUpPin)
|
|
{
|
|
return ((READ_BIT(PWR->CR4, WakeUpPin) == (WakeUpPin)) ? 1UL : 0UL);
|
|
}
|
|
|
|
/**
|
|
* @brief Enable GPIO pull-up state in Standby and Shutdown modes
|
|
* @rmtoll PUCRA PU0-15 LL_PWR_EnableGPIOPullUp\n
|
|
* PUCRB PU0-15 LL_PWR_EnableGPIOPullUp\n
|
|
* PUCRC PU0-15 LL_PWR_EnableGPIOPullUp\n
|
|
* PUCRD PU0-15 LL_PWR_EnableGPIOPullUp\n
|
|
* PUCRE PU0-15 LL_PWR_EnableGPIOPullUp\n
|
|
* PUCRF PU0-13 LL_PWR_EnableGPIOPullUp
|
|
* @param GPIO This parameter can be one of the following values:
|
|
* @arg @ref LL_PWR_GPIO_A
|
|
* @arg @ref LL_PWR_GPIO_B
|
|
* @arg @ref LL_PWR_GPIO_C
|
|
* @arg @ref LL_PWR_GPIO_D
|
|
* @arg @ref LL_PWR_GPIO_E (*)
|
|
* @arg @ref LL_PWR_GPIO_F
|
|
* @param GPIONumber This parameter can be one of the following values:
|
|
* @arg @ref LL_PWR_GPIO_BIT_0
|
|
* @arg @ref LL_PWR_GPIO_BIT_1
|
|
* @arg @ref LL_PWR_GPIO_BIT_2
|
|
* @arg @ref LL_PWR_GPIO_BIT_3
|
|
* @arg @ref LL_PWR_GPIO_BIT_4
|
|
* @arg @ref LL_PWR_GPIO_BIT_5
|
|
* @arg @ref LL_PWR_GPIO_BIT_6
|
|
* @arg @ref LL_PWR_GPIO_BIT_7
|
|
* @arg @ref LL_PWR_GPIO_BIT_8
|
|
* @arg @ref LL_PWR_GPIO_BIT_9
|
|
* @arg @ref LL_PWR_GPIO_BIT_10
|
|
* @arg @ref LL_PWR_GPIO_BIT_11
|
|
* @arg @ref LL_PWR_GPIO_BIT_12
|
|
* @arg @ref LL_PWR_GPIO_BIT_13
|
|
* @arg @ref LL_PWR_GPIO_BIT_14
|
|
* @arg @ref LL_PWR_GPIO_BIT_15
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber)
|
|
{
|
|
SET_BIT(*((__IO uint32_t *)GPIO), GPIONumber);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable GPIO pull-up state in Standby and Shutdown modes
|
|
* @rmtoll PUCRA PU0-15 LL_PWR_DisableGPIOPullUp\n
|
|
* PUCRB PU0-15 LL_PWR_DisableGPIOPullUp\n
|
|
* PUCRC PU0-15 LL_PWR_DisableGPIOPullUp\n
|
|
* PUCRD PU0-15 LL_PWR_DisableGPIOPullUp\n
|
|
* PUCRE PU0-15 LL_PWR_DisableGPIOPullUp\n
|
|
* PUCRF PU0-13 LL_PWR_DisableGPIOPullUp
|
|
* @param GPIO This parameter can be one of the following values:
|
|
* @arg @ref LL_PWR_GPIO_A
|
|
* @arg @ref LL_PWR_GPIO_B
|
|
* @arg @ref LL_PWR_GPIO_C
|
|
* @arg @ref LL_PWR_GPIO_D
|
|
* @arg @ref LL_PWR_GPIO_E (*)
|
|
* @arg @ref LL_PWR_GPIO_F
|
|
* @param GPIONumber This parameter can be one of the following values:
|
|
* @arg @ref LL_PWR_GPIO_BIT_0
|
|
* @arg @ref LL_PWR_GPIO_BIT_1
|
|
* @arg @ref LL_PWR_GPIO_BIT_2
|
|
* @arg @ref LL_PWR_GPIO_BIT_3
|
|
* @arg @ref LL_PWR_GPIO_BIT_4
|
|
* @arg @ref LL_PWR_GPIO_BIT_5
|
|
* @arg @ref LL_PWR_GPIO_BIT_6
|
|
* @arg @ref LL_PWR_GPIO_BIT_7
|
|
* @arg @ref LL_PWR_GPIO_BIT_8
|
|
* @arg @ref LL_PWR_GPIO_BIT_9
|
|
* @arg @ref LL_PWR_GPIO_BIT_10
|
|
* @arg @ref LL_PWR_GPIO_BIT_11
|
|
* @arg @ref LL_PWR_GPIO_BIT_12
|
|
* @arg @ref LL_PWR_GPIO_BIT_13
|
|
* @arg @ref LL_PWR_GPIO_BIT_14
|
|
* @arg @ref LL_PWR_GPIO_BIT_15
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber)
|
|
{
|
|
CLEAR_BIT(*((__IO uint32_t *)GPIO), GPIONumber);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if GPIO pull-up state is enabled
|
|
* @rmtoll PUCRA PU0-15 LL_PWR_IsEnabledGPIOPullUp\n
|
|
* PUCRB PU0-15 LL_PWR_IsEnabledGPIOPullUp\n
|
|
* PUCRC PU0-15 LL_PWR_IsEnabledGPIOPullUp\n
|
|
* PUCRD PU0-15 LL_PWR_IsEnabledGPIOPullUp\n
|
|
* PUCRE PU0-15 LL_PWR_IsEnabledGPIOPullUp\n
|
|
* PUCRF PU0-13 LL_PWR_IsEnabledGPIOPullUp
|
|
* @param GPIO This parameter can be one of the following values:
|
|
* @arg @ref LL_PWR_GPIO_A
|
|
* @arg @ref LL_PWR_GPIO_B
|
|
* @arg @ref LL_PWR_GPIO_C
|
|
* @arg @ref LL_PWR_GPIO_D
|
|
* @arg @ref LL_PWR_GPIO_E (*)
|
|
* @arg @ref LL_PWR_GPIO_F
|
|
* @param GPIONumber This parameter can be one of the following values:
|
|
* @arg @ref LL_PWR_GPIO_BIT_0
|
|
* @arg @ref LL_PWR_GPIO_BIT_1
|
|
* @arg @ref LL_PWR_GPIO_BIT_2
|
|
* @arg @ref LL_PWR_GPIO_BIT_3
|
|
* @arg @ref LL_PWR_GPIO_BIT_4
|
|
* @arg @ref LL_PWR_GPIO_BIT_5
|
|
* @arg @ref LL_PWR_GPIO_BIT_6
|
|
* @arg @ref LL_PWR_GPIO_BIT_7
|
|
* @arg @ref LL_PWR_GPIO_BIT_8
|
|
* @arg @ref LL_PWR_GPIO_BIT_9
|
|
* @arg @ref LL_PWR_GPIO_BIT_10
|
|
* @arg @ref LL_PWR_GPIO_BIT_11
|
|
* @arg @ref LL_PWR_GPIO_BIT_12
|
|
* @arg @ref LL_PWR_GPIO_BIT_13
|
|
* @arg @ref LL_PWR_GPIO_BIT_14
|
|
* @arg @ref LL_PWR_GPIO_BIT_15
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsEnabledGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber)
|
|
{
|
|
return ((READ_BIT(*((__IO uint32_t *)GPIO), GPIONumber) == (GPIONumber)) ? 1UL : 0UL);
|
|
}
|
|
|
|
/**
|
|
* @brief Enable GPIO pull-down state in Standby and Shutdown modes
|
|
* @rmtoll PDCRA PD0-15 LL_PWR_EnableGPIOPullDown\n
|
|
* PDCRB PD0-15 LL_PWR_EnableGPIOPullDown\n
|
|
* PDCRC PD0-15 LL_PWR_EnableGPIOPullDown\n
|
|
* PDCRD PD0-15 LL_PWR_EnableGPIOPullDown\n
|
|
* PDCRE PD0-15 LL_PWR_EnableGPIOPullDown\n
|
|
* PDCRF PD0-13 LL_PWR_EnableGPIOPullDown
|
|
* @param GPIO This parameter can be one of the following values:
|
|
* @arg @ref LL_PWR_GPIO_A
|
|
* @arg @ref LL_PWR_GPIO_B
|
|
* @arg @ref LL_PWR_GPIO_C
|
|
* @arg @ref LL_PWR_GPIO_D
|
|
* @arg @ref LL_PWR_GPIO_E (*)
|
|
* @arg @ref LL_PWR_GPIO_F
|
|
* @param GPIONumber This parameter can be one of the following values:
|
|
* @arg @ref LL_PWR_GPIO_BIT_0
|
|
* @arg @ref LL_PWR_GPIO_BIT_1
|
|
* @arg @ref LL_PWR_GPIO_BIT_2
|
|
* @arg @ref LL_PWR_GPIO_BIT_3
|
|
* @arg @ref LL_PWR_GPIO_BIT_4
|
|
* @arg @ref LL_PWR_GPIO_BIT_5
|
|
* @arg @ref LL_PWR_GPIO_BIT_6
|
|
* @arg @ref LL_PWR_GPIO_BIT_7
|
|
* @arg @ref LL_PWR_GPIO_BIT_8
|
|
* @arg @ref LL_PWR_GPIO_BIT_9
|
|
* @arg @ref LL_PWR_GPIO_BIT_10
|
|
* @arg @ref LL_PWR_GPIO_BIT_11
|
|
* @arg @ref LL_PWR_GPIO_BIT_12
|
|
* @arg @ref LL_PWR_GPIO_BIT_13
|
|
* @arg @ref LL_PWR_GPIO_BIT_14
|
|
* @arg @ref LL_PWR_GPIO_BIT_15
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber)
|
|
{
|
|
SET_BIT(*((__IO uint32_t *)(GPIO + 4U)), GPIONumber);
|
|
}
|
|
|
|
/**
|
|
* @brief Disable GPIO pull-down state in Standby and Shutdown modes
|
|
* @rmtoll PDCRA PD0-15 LL_PWR_DisableGPIOPullDown\n
|
|
* PDCRB PD0-15 LL_PWR_DisableGPIOPullDown\n
|
|
* PDCRC PD0-15 LL_PWR_DisableGPIOPullDown\n
|
|
* PDCRD PD0-15 LL_PWR_DisableGPIOPullDown\n
|
|
* PDCRE PD0-15 LL_PWR_DisableGPIOPullDown\n
|
|
* PDCRF PD0-13 LL_PWR_DisableGPIOPullDown
|
|
* @param GPIO This parameter can be one of the following values:
|
|
* @arg @ref LL_PWR_GPIO_A
|
|
* @arg @ref LL_PWR_GPIO_B
|
|
* @arg @ref LL_PWR_GPIO_C
|
|
* @arg @ref LL_PWR_GPIO_D
|
|
* @arg @ref LL_PWR_GPIO_E (*)
|
|
* @arg @ref LL_PWR_GPIO_F
|
|
* @param GPIONumber This parameter can be one of the following values:
|
|
* @arg @ref LL_PWR_GPIO_BIT_0
|
|
* @arg @ref LL_PWR_GPIO_BIT_1
|
|
* @arg @ref LL_PWR_GPIO_BIT_2
|
|
* @arg @ref LL_PWR_GPIO_BIT_3
|
|
* @arg @ref LL_PWR_GPIO_BIT_4
|
|
* @arg @ref LL_PWR_GPIO_BIT_5
|
|
* @arg @ref LL_PWR_GPIO_BIT_6
|
|
* @arg @ref LL_PWR_GPIO_BIT_7
|
|
* @arg @ref LL_PWR_GPIO_BIT_8
|
|
* @arg @ref LL_PWR_GPIO_BIT_9
|
|
* @arg @ref LL_PWR_GPIO_BIT_10
|
|
* @arg @ref LL_PWR_GPIO_BIT_11
|
|
* @arg @ref LL_PWR_GPIO_BIT_12
|
|
* @arg @ref LL_PWR_GPIO_BIT_13
|
|
* @arg @ref LL_PWR_GPIO_BIT_14
|
|
* @arg @ref LL_PWR_GPIO_BIT_15
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber)
|
|
{
|
|
CLEAR_BIT(*((__IO uint32_t *)(GPIO + 4U)), GPIONumber);
|
|
}
|
|
|
|
/**
|
|
* @brief Check if GPIO pull-down state is enabled
|
|
* @rmtoll PDCRA PD0-15 LL_PWR_IsEnabledGPIOPullDown\n
|
|
* PDCRB PD0-15 LL_PWR_IsEnabledGPIOPullDown\n
|
|
* PDCRC PD0-15 LL_PWR_IsEnabledGPIOPullDown\n
|
|
* PDCRD PD0-15 LL_PWR_IsEnabledGPIOPullDown\n
|
|
* PDCRE PD0-15 LL_PWR_IsEnabledGPIOPullDown\n
|
|
* PDCRF PD0-13 LL_PWR_IsEnabledGPIOPullDown
|
|
* @param GPIO This parameter can be one of the following values:
|
|
* @arg @ref LL_PWR_GPIO_A
|
|
* @arg @ref LL_PWR_GPIO_B
|
|
* @arg @ref LL_PWR_GPIO_C
|
|
* @arg @ref LL_PWR_GPIO_D
|
|
* @arg @ref LL_PWR_GPIO_E (*)
|
|
* @arg @ref LL_PWR_GPIO_F
|
|
* @param GPIONumber This parameter can be one of the following values:
|
|
* @arg @ref LL_PWR_GPIO_BIT_0
|
|
* @arg @ref LL_PWR_GPIO_BIT_1
|
|
* @arg @ref LL_PWR_GPIO_BIT_2
|
|
* @arg @ref LL_PWR_GPIO_BIT_3
|
|
* @arg @ref LL_PWR_GPIO_BIT_4
|
|
* @arg @ref LL_PWR_GPIO_BIT_5
|
|
* @arg @ref LL_PWR_GPIO_BIT_6
|
|
* @arg @ref LL_PWR_GPIO_BIT_7
|
|
* @arg @ref LL_PWR_GPIO_BIT_8
|
|
* @arg @ref LL_PWR_GPIO_BIT_9
|
|
* @arg @ref LL_PWR_GPIO_BIT_10
|
|
* @arg @ref LL_PWR_GPIO_BIT_11
|
|
* @arg @ref LL_PWR_GPIO_BIT_12
|
|
* @arg @ref LL_PWR_GPIO_BIT_13
|
|
* @arg @ref LL_PWR_GPIO_BIT_14
|
|
* @arg @ref LL_PWR_GPIO_BIT_15
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsEnabledGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber)
|
|
{
|
|
return ((READ_BIT(*((__IO uint32_t *)(GPIO + 4U)), GPIONumber) == (GPIONumber)) ? 1UL : 0UL);
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWR_LL_EF_FLAG_Management FLAG_Management
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Get Internal Wake-up line Flag
|
|
* @rmtoll SR1 WUFI LL_PWR_IsActiveFlag_InternWU
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_InternWU(void)
|
|
{
|
|
return ((READ_BIT(PWR->SR1, PWR_SR1_WUFI) == (PWR_SR1_WUFI)) ? 1UL : 0UL);
|
|
}
|
|
|
|
/**
|
|
* @brief Get Stand-By Flag
|
|
* @rmtoll SR1 SBF LL_PWR_IsActiveFlag_SB
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_SB(void)
|
|
{
|
|
return ((READ_BIT(PWR->SR1, PWR_SR1_SBF) == (PWR_SR1_SBF)) ? 1UL : 0UL);
|
|
}
|
|
|
|
/**
|
|
* @brief Get Wake-up Flag 6
|
|
* @rmtoll SR1 WUF6 LL_PWR_IsActiveFlag_WU6
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU6(void)
|
|
{
|
|
return ((READ_BIT(PWR->SR1, PWR_SR1_WUF6) == (PWR_SR1_WUF6)) ? 1UL : 0UL);
|
|
}
|
|
|
|
#if defined(PWR_CR3_EWUP5)
|
|
/**
|
|
* @brief Get Wake-up Flag 5
|
|
* @rmtoll SR1 WUF5 LL_PWR_IsActiveFlag_WU5
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU5(void)
|
|
{
|
|
return ((READ_BIT(PWR->SR1, PWR_SR1_WUF5) == (PWR_SR1_WUF5)) ? 1UL : 0UL);
|
|
}
|
|
#endif /* PWR_CR3_EWUP5 */
|
|
|
|
/**
|
|
* @brief Get Wake-up Flag 4
|
|
* @rmtoll SR1 WUF4 LL_PWR_IsActiveFlag_WU4
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU4(void)
|
|
{
|
|
return ((READ_BIT(PWR->SR1, PWR_SR1_WUF4) == (PWR_SR1_WUF4)) ? 1UL : 0UL);
|
|
}
|
|
|
|
#if defined(PWR_CR3_EWUP3)
|
|
/**
|
|
* @brief Get Wake-up Flag 3
|
|
* @rmtoll SR1 WUF3 LL_PWR_IsActiveFlag_WU3
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU3(void)
|
|
{
|
|
return ((READ_BIT(PWR->SR1, PWR_SR1_WUF3) == (PWR_SR1_WUF3)) ? 1UL : 0UL);
|
|
}
|
|
#endif /* PWR_CR3_EWUP3 */
|
|
|
|
/**
|
|
* @brief Get Wake-up Flag 2
|
|
* @rmtoll SR1 WUF2 LL_PWR_IsActiveFlag_WU2
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU2(void)
|
|
{
|
|
return ((READ_BIT(PWR->SR1, PWR_SR1_WUF2) == (PWR_SR1_WUF2)) ? 1UL : 0UL);
|
|
}
|
|
|
|
/**
|
|
* @brief Get Wake-up Flag 1
|
|
* @rmtoll SR1 WUF1 LL_PWR_IsActiveFlag_WU1
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU1(void)
|
|
{
|
|
return ((READ_BIT(PWR->SR1, PWR_SR1_WUF1) == (PWR_SR1_WUF1)) ? 1UL : 0UL);
|
|
}
|
|
|
|
/**
|
|
* @brief Clear Stand-By Flag
|
|
* @rmtoll SCR CSBF LL_PWR_ClearFlag_SB
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_ClearFlag_SB(void)
|
|
{
|
|
WRITE_REG(PWR->SCR, PWR_SCR_CSBF);
|
|
}
|
|
|
|
/**
|
|
* @brief Clear Wake-up Flags
|
|
* @rmtoll SCR CWUF LL_PWR_ClearFlag_WU
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_ClearFlag_WU(void)
|
|
{
|
|
WRITE_REG(PWR->SCR, PWR_SCR_CWUF);
|
|
}
|
|
|
|
/**
|
|
* @brief Clear Wake-up Flag 6
|
|
* @rmtoll SCR CWUF6 LL_PWR_ClearFlag_WU6
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_ClearFlag_WU6(void)
|
|
{
|
|
WRITE_REG(PWR->SCR, PWR_SCR_CWUF6);
|
|
}
|
|
|
|
#if defined(PWR_CR3_EWUP5)
|
|
/**
|
|
* @brief Clear Wake-up Flag 5
|
|
* @rmtoll SCR CWUF5 LL_PWR_ClearFlag_WU5
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_ClearFlag_WU5(void)
|
|
{
|
|
WRITE_REG(PWR->SCR, PWR_SCR_CWUF5);
|
|
}
|
|
#endif /* PWR_CR3_EWUP5 */
|
|
|
|
/**
|
|
* @brief Clear Wake-up Flag 4
|
|
* @rmtoll SCR CWUF4 LL_PWR_ClearFlag_WU4
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_ClearFlag_WU4(void)
|
|
{
|
|
WRITE_REG(PWR->SCR, PWR_SCR_CWUF4);
|
|
}
|
|
|
|
#if defined(PWR_CR3_EWUP3)
|
|
/**
|
|
* @brief Clear Wake-up Flag 3
|
|
* @rmtoll SCR CWUF3 LL_PWR_ClearFlag_WU3
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_ClearFlag_WU3(void)
|
|
{
|
|
WRITE_REG(PWR->SCR, PWR_SCR_CWUF3);
|
|
}
|
|
#endif /* PWR_CR3_EWUP3 */
|
|
|
|
/**
|
|
* @brief Clear Wake-up Flag 2
|
|
* @rmtoll SCR CWUF2 LL_PWR_ClearFlag_WU2
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_ClearFlag_WU2(void)
|
|
{
|
|
WRITE_REG(PWR->SCR, PWR_SCR_CWUF2);
|
|
}
|
|
|
|
/**
|
|
* @brief Clear Wake-up Flag 1
|
|
* @rmtoll SCR CWUF1 LL_PWR_ClearFlag_WU1
|
|
* @retval None
|
|
*/
|
|
__STATIC_INLINE void LL_PWR_ClearFlag_WU1(void)
|
|
{
|
|
WRITE_REG(PWR->SCR, PWR_SCR_CWUF1);
|
|
}
|
|
|
|
#if defined (PWR_PVM_SUPPORT)
|
|
/**
|
|
* @brief Indicate whether VDD voltage is below or above the selected PVD
|
|
* threshold
|
|
* @rmtoll SR2 PVDMO_USB LL_PWR_IsActiveFlag_PVMOUSB
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVMOUSB(void)
|
|
{
|
|
return ((READ_BIT(PWR->SR2, PWR_SR2_PVMO_USB) == (PWR_SR2_PVMO_USB)) ? 1UL : 0UL);
|
|
}
|
|
#endif /* PWR_PVM_SUPPORT */
|
|
|
|
#if defined(PWR_SR2_PVDO)
|
|
/**
|
|
* @brief Indicate whether VDD voltage is below or above the selected PVD
|
|
* threshold
|
|
* @rmtoll SR2 PVDO LL_PWR_IsActiveFlag_PVDO
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVDO(void)
|
|
{
|
|
return ((READ_BIT(PWR->SR2, PWR_SR2_PVDO) == (PWR_SR2_PVDO)) ? 1UL : 0UL);
|
|
}
|
|
#endif /* PWR_SR2_PVDO */
|
|
|
|
/**
|
|
* @brief Indicate whether the regulator is ready in the selected voltage
|
|
* range or if its output voltage is still changing to the required
|
|
* voltage level
|
|
* @note: Take care, return value "0" means the regulator is ready.
|
|
* Return value "1" means the output voltage range is still changing.
|
|
* @rmtoll SR2 VOSF LL_PWR_IsActiveFlag_VOS
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VOS(void)
|
|
{
|
|
return ((READ_BIT(PWR->SR2, PWR_SR2_VOSF) == (PWR_SR2_VOSF)) ? 1UL : 0UL);
|
|
}
|
|
|
|
/**
|
|
* @brief Indicate whether the regulator is ready in main mode or is in
|
|
* low-power mode
|
|
* @note: Take care, return value "0" means regulator is ready in main mode
|
|
* Return value "1" means regulator is in low-power mode (LPR)
|
|
* @rmtoll SR2 REGLPF LL_PWR_IsActiveFlag_REGLPF
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_REGLPF(void)
|
|
{
|
|
return ((READ_BIT(PWR->SR2, PWR_SR2_REGLPF) == (PWR_SR2_REGLPF)) ? 1UL : 0UL);
|
|
}
|
|
|
|
/**
|
|
* @brief Indicate whether or not the low-power regulator is ready
|
|
* @rmtoll SR2 REGLPS LL_PWR_IsActiveFlag_REGLPS
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_REGLPS(void)
|
|
{
|
|
return ((READ_BIT(PWR->SR2, PWR_SR2_REGLPS) == (PWR_SR2_REGLPS)) ? 1UL : 0UL);
|
|
}
|
|
|
|
/**
|
|
* @brief Indicate whether or not the flash is ready to be accessed
|
|
* @rmtoll SR2 FLASH_RDY LL_PWR_IsActiveFlag_FLASH_RDY
|
|
* @retval State of bit (1 or 0).
|
|
*/
|
|
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_FLASH_RDY(void)
|
|
{
|
|
return ((READ_BIT(PWR->SR2, PWR_SR2_FLASH_RDY) == (PWR_SR2_FLASH_RDY)) ? 1UL : 0UL);
|
|
}
|
|
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#if defined(USE_FULL_LL_DRIVER)
|
|
/** @defgroup PWR_LL_EF_Init De-initialization function
|
|
* @{
|
|
*/
|
|
ErrorStatus LL_PWR_DeInit(void);
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* USE_FULL_LL_DRIVER */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#endif /* defined(PWR) */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* STM32G0xx_LL_PWR_H */
|