Initiale Verion
This commit is contained in:
9249
Drivers/CMSIS/Device/ST/STM32G0xx/Include/stm32g071xx.h
Normal file
9249
Drivers/CMSIS/Device/ST/STM32G0xx/Include/stm32g071xx.h
Normal file
File diff suppressed because it is too large
Load Diff
244
Drivers/CMSIS/Device/ST/STM32G0xx/Include/stm32g0xx.h
Normal file
244
Drivers/CMSIS/Device/ST/STM32G0xx/Include/stm32g0xx.h
Normal file
@ -0,0 +1,244 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32g0xx.h
|
||||
* @author MCD Application Team
|
||||
* @brief CMSIS STM32G0xx Device Peripheral Access Layer Header File.
|
||||
*
|
||||
* The file is the unique include file that the application programmer
|
||||
* is using in the C source code, usually in main.c. This file contains:
|
||||
* - Configuration section that allows to select:
|
||||
* - The STM32G0xx device used in the target application
|
||||
* - To use or not the peripherals drivers in application code(i.e.
|
||||
* code will be based on direct access to peripherals registers
|
||||
* rather than drivers API), this option is controlled by
|
||||
* "#define USE_HAL_DRIVER"
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2018-2021 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32g0xx
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef STM32G0xx_H
|
||||
#define STM32G0xx_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif /* __cplusplus */
|
||||
|
||||
/** @addtogroup Library_configuration_section
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief STM32 Family
|
||||
*/
|
||||
#if !defined (STM32G0)
|
||||
#define STM32G0
|
||||
#endif /* STM32G0 */
|
||||
|
||||
/* Uncomment the line below according to the target STM32G0 device used in your
|
||||
application
|
||||
*/
|
||||
|
||||
#if !defined (STM32G071xx) && !defined (STM32G081xx) && !defined (STM32G070xx) \
|
||||
&& !defined (STM32G030xx) && !defined (STM32G031xx) && !defined (STM32G041xx) \
|
||||
&& !defined (STM32G0B0xx) && !defined (STM32G0B1xx) && !defined (STM32G0C1xx) \
|
||||
&& !defined (STM32G050xx) && !defined (STM32G051xx) && !defined (STM32G061xx)
|
||||
/* #define STM32G0B0xx */ /*!< STM32G0B0xx Devices */
|
||||
/* #define STM32G0B1xx */ /*!< STM32G0B1xx Devices */
|
||||
/* #define STM32G0C1xx */ /*!< STM32G0C1xx Devices */
|
||||
/* #define STM32G070xx */ /*!< STM32G070xx Devices */
|
||||
/* #define STM32G071xx */ /*!< STM32G071xx Devices */
|
||||
/* #define STM32G081xx */ /*!< STM32G081xx Devices */
|
||||
/* #define STM32G050xx */ /*!< STM32G050xx Devices */
|
||||
/* #define STM32G051xx */ /*!< STM32G051xx Devices */
|
||||
/* #define STM32G061xx */ /*!< STM32G061xx Devices */
|
||||
/* #define STM32G030xx */ /*!< STM32G030xx Devices */
|
||||
/* #define STM32G031xx */ /*!< STM32G031xx Devices */
|
||||
/* #define STM32G041xx */ /*!< STM32G041xx Devices */
|
||||
#endif
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to switch between these
|
||||
devices, you can define the device in your toolchain compiler preprocessor.
|
||||
*/
|
||||
#if !defined (USE_HAL_DRIVER)
|
||||
/**
|
||||
* @brief Comment the line below if you will not use the peripherals drivers.
|
||||
In this case, these drivers will not be included and the application code will
|
||||
be based on direct access to peripherals registers
|
||||
*/
|
||||
/*#define USE_HAL_DRIVER */
|
||||
#endif /* USE_HAL_DRIVER */
|
||||
|
||||
/**
|
||||
* @brief CMSIS Device version number $VERSION$
|
||||
*/
|
||||
#define __STM32G0_CMSIS_VERSION_MAIN (0x01U) /*!< [31:24] main version */
|
||||
#define __STM32G0_CMSIS_VERSION_SUB1 (0x04U) /*!< [23:16] sub1 version */
|
||||
#define __STM32G0_CMSIS_VERSION_SUB2 (0x03U) /*!< [15:8] sub2 version */
|
||||
#define __STM32G0_CMSIS_VERSION_RC (0x00U) /*!< [7:0] release candidate */
|
||||
#define __STM32G0_CMSIS_VERSION ((__STM32G0_CMSIS_VERSION_MAIN << 24)\
|
||||
|(__STM32G0_CMSIS_VERSION_SUB1 << 16)\
|
||||
|(__STM32G0_CMSIS_VERSION_SUB2 << 8 )\
|
||||
|(__STM32G0_CMSIS_VERSION_RC))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup Device_Included
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined(STM32G0B1xx)
|
||||
#include "stm32g0b1xx.h"
|
||||
#elif defined(STM32G0C1xx)
|
||||
#include "stm32g0c1xx.h"
|
||||
#elif defined(STM32G0B0xx)
|
||||
#include "stm32g0b0xx.h"
|
||||
#elif defined(STM32G071xx)
|
||||
#include "stm32g071xx.h"
|
||||
#elif defined(STM32G081xx)
|
||||
#include "stm32g081xx.h"
|
||||
#elif defined(STM32G070xx)
|
||||
#include "stm32g070xx.h"
|
||||
#elif defined(STM32G031xx)
|
||||
#include "stm32g031xx.h"
|
||||
#elif defined(STM32G041xx)
|
||||
#include "stm32g041xx.h"
|
||||
#elif defined(STM32G030xx)
|
||||
#include "stm32g030xx.h"
|
||||
#elif defined(STM32G051xx)
|
||||
#include "stm32g051xx.h"
|
||||
#elif defined(STM32G061xx)
|
||||
#include "stm32g061xx.h"
|
||||
#elif defined(STM32G050xx)
|
||||
#include "stm32g050xx.h"
|
||||
#else
|
||||
#error "Please select first the target STM32G0xx device used in your application (in stm32g0xx.h file)"
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup Exported_types
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
RESET = 0,
|
||||
SET = !RESET
|
||||
} FlagStatus, ITStatus;
|
||||
|
||||
typedef enum
|
||||
{
|
||||
DISABLE = 0,
|
||||
ENABLE = !DISABLE
|
||||
} FunctionalState;
|
||||
#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
|
||||
|
||||
typedef enum
|
||||
{
|
||||
SUCCESS = 0,
|
||||
ERROR = !SUCCESS
|
||||
} ErrorStatus;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @addtogroup Exported_macros
|
||||
* @{
|
||||
*/
|
||||
#define SET_BIT(REG, BIT) ((REG) |= (BIT))
|
||||
|
||||
#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
|
||||
|
||||
#define READ_BIT(REG, BIT) ((REG) & (BIT))
|
||||
|
||||
#define CLEAR_REG(REG) ((REG) = (0x0))
|
||||
|
||||
#define WRITE_REG(REG, VAL) ((REG) = (VAL))
|
||||
|
||||
#define READ_REG(REG) ((REG))
|
||||
|
||||
#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
|
||||
|
||||
/* Use of interrupt control for register exclusive access */
|
||||
/* Atomic 32-bit register access macro to set one or several bits */
|
||||
#define ATOMIC_SET_BIT(REG, BIT) \
|
||||
do { \
|
||||
uint32_t primask; \
|
||||
primask = __get_PRIMASK(); \
|
||||
__set_PRIMASK(1); \
|
||||
SET_BIT((REG), (BIT)); \
|
||||
__set_PRIMASK(primask); \
|
||||
} while(0)
|
||||
|
||||
/* Atomic 32-bit register access macro to clear one or several bits */
|
||||
#define ATOMIC_CLEAR_BIT(REG, BIT) \
|
||||
do { \
|
||||
uint32_t primask; \
|
||||
primask = __get_PRIMASK(); \
|
||||
__set_PRIMASK(1); \
|
||||
CLEAR_BIT((REG), (BIT)); \
|
||||
__set_PRIMASK(primask); \
|
||||
} while(0)
|
||||
|
||||
/* Atomic 32-bit register access macro to clear and set one or several bits */
|
||||
#define ATOMIC_MODIFY_REG(REG, CLEARMSK, SETMASK) \
|
||||
do { \
|
||||
uint32_t primask; \
|
||||
primask = __get_PRIMASK(); \
|
||||
__set_PRIMASK(1); \
|
||||
MODIFY_REG((REG), (CLEARMSK), (SETMASK)); \
|
||||
__set_PRIMASK(primask); \
|
||||
} while(0)
|
||||
|
||||
/* Atomic 16-bit register access macro to set one or several bits */
|
||||
#define ATOMIC_SETH_BIT(REG, BIT) ATOMIC_SET_BIT(REG, BIT) \
|
||||
|
||||
/* Atomic 16-bit register access macro to clear one or several bits */
|
||||
#define ATOMIC_CLEARH_BIT(REG, BIT) ATOMIC_CLEAR_BIT(REG, BIT) \
|
||||
|
||||
/* Atomic 16-bit register access macro to clear and set one or several bits */
|
||||
#define ATOMIC_MODIFYH_REG(REG, CLEARMSK, SETMASK) ATOMIC_MODIFY_REG(REG, CLEARMSK, SETMASK) \
|
||||
|
||||
/*#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))*/
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined (USE_HAL_DRIVER)
|
||||
#include "stm32g0xx_hal.h"
|
||||
#endif /* USE_HAL_DRIVER */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif /* __cplusplus */
|
||||
|
||||
#endif /* STM32G0xx_H */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
103
Drivers/CMSIS/Device/ST/STM32G0xx/Include/system_stm32g0xx.h
Normal file
103
Drivers/CMSIS/Device/ST/STM32G0xx/Include/system_stm32g0xx.h
Normal file
@ -0,0 +1,103 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file system_stm32g0xx.h
|
||||
* @author MCD Application Team
|
||||
* @brief CMSIS Cortex-M0+ Device System Source File for STM32G0xx devices.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2018-2021 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32g0xx_system
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Define to prevent recursive inclusion
|
||||
*/
|
||||
#ifndef SYSTEM_STM32G0XX_H
|
||||
#define SYSTEM_STM32G0XX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/** @addtogroup STM32G0xx_System_Includes
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @addtogroup STM32G0xx_System_Exported_types
|
||||
* @{
|
||||
*/
|
||||
/* This variable is updated in three ways:
|
||||
1) by calling CMSIS function SystemCoreClockUpdate()
|
||||
2) by calling HAL API function HAL_RCC_GetSysClockFreq()
|
||||
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
|
||||
Note: If you use this function to configure the system clock; then there
|
||||
is no need to call the 2 first functions listed above, since SystemCoreClock
|
||||
variable is updated automatically.
|
||||
*/
|
||||
extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
|
||||
|
||||
extern const uint32_t AHBPrescTable[16]; /*!< AHB prescalers table values */
|
||||
extern const uint32_t APBPrescTable[8]; /*!< APB prescalers table values */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32G0xx_System_Exported_Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32G0xx_System_Exported_Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32G0xx_System_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
extern void SystemInit(void);
|
||||
extern void SystemCoreClockUpdate(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /*SYSTEM_STM32G0XX_H */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
6
Drivers/CMSIS/Device/ST/STM32G0xx/LICENSE.txt
Normal file
6
Drivers/CMSIS/Device/ST/STM32G0xx/LICENSE.txt
Normal file
@ -0,0 +1,6 @@
|
||||
This software component is provided to you as part of a software package and
|
||||
applicable license terms are in the Package_license file. If you received this
|
||||
software component outside of a package or without applicable license terms,
|
||||
the terms of the Apache-2.0 license shall apply.
|
||||
You may obtain a copy of the Apache-2.0 at:
|
||||
https://opensource.org/licenses/Apache-2.0
|
||||
Reference in New Issue
Block a user